Label = XANTECH (page 1 / 1)

Connects four emitter ports and power supply to all Xantech infrared receivers and keypadsFour parallel emitter ports with 470-Ohm resistors drive four single or four dual emittersQuick-connect stereo mini jack for IRReceivers that use a stereo mini plugSTATUS terminal for connection of IR Receivers and Keypads that have status LED's2.1 mm coaxial power jackIncludes power supply

Connects four emitter ports and power supply to all Xantech infrared receivers and keypadsFour parallel emitter ports with 470-Ohm resistors drive four single or four dual emittersQuick-connect stereo mini jack for IRReceivers that use a stereo mini plugSTATUS terminal for connection of IR Receivers and Keypads that have status LED's2.1 mm coaxial power jackPower Supply required! Not included. Model# 789-44PS-RP is the same exact unit that includes a power supply.

D5SHK4

Designer Dual Blink Emitter

Extended Range (up to 120 feet) For use with all types of cable boxes, satellite boxes, remote controls and TVs Works with LED, LCD & plasma TV's and CFL lighting White, brass & black bezels included to match d?cor

Featuring five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. The Xantech HL85BK LCD/CFL friendly Hidden Link IR Kit includes an HL85 table top infrared receiver, 1x4 connecting block and 4 IR emitters.Native Carrier Frequency Transmission Circuitry Nearly every IR system relies on a carrier frequency to "carry" the commands to their destination. Some consumer electronic devices, especially digital cable and satellite TV boxes, are very picky regarding carrier frequency accuracy. At times, they may not accept remote commands unless precisely the right carrier frequency is present.Unfortunately, many IR repeater systems take a technical short-cut and simply strip away the carrier frequency upon reception instead of intelligently identifying and removing the unwanted noise and interference from it -- and then attempt to regenerate or replicate the carrier frequency. This can result in incomplete or incorrect IR signals and a lot of frustration and expense for a system designer.Xantech takes no shortcuts here. Rather than trying to make a copy of the carrier frequency to compensate for inadequate parts and circuit design, Xantech uses better-quality components and circuitry that can accurately process the original carrier frequency. By doing so, a Xantech IR kit eliminates the noise and interference instead of the carrier itself, and transmits the original IR signal in its correct form to the rest of the system. The result is a dead-on accurate signal transmission -- minus all the noise and distortion.

Officially licensed team fan gear by the . Officially licensed by the . Top-Quality, manufacured by XANTECH .

Security Systems & Surveillance Equipment | JMAC Supply

The 282D Designer Emitter contains a tiny infrared LED housed in a miniature, designer styled, black appearing, injection molded plastic shell. It emits IR (infrared) control signals sent to it by IR receivers or other Xantech controllers. The 282D can be installed directly on the IR sensor window of the controlled device or other suitable locations.

The 283D Blink-IR Designer Emitter contains a small Infrared LED housed in a miniature, designer styled, black appearing, injection molded plastic shell. Unlike other emitters, the 283D emits visible red light in addition to IR (infrared) control signals when activated by IR commands sent to it by IR receivers or other Xantech controllers. The 283D is designed to be installed directly on the IR sensor window of the controlled device.

The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable - as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.

The new 95 and 85 series IR kits from Xantech feature five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. Xantech is the only manufacturer building an IR product line around this level of advanced circuit design. IR is a crucial control "backbone" in nearly every A/V system installation, and Xantech is committed to IR that works perfectly every time which demands such a no-compromise approach. If it is an IR problem and Xantech can't solve it, nobody can. All Xantech IR series kits feature advanced circuitry which passes the native IR carrier and data signals faithfully and reliably to ensure proper control of all A/V components. Premium kit for high-end and custom installations requiring the ultimate in IR control.95-series works with remotes up to 120 feet away. Compatible with all types of TV's including plasma, LCD and LED, and all satellite and cable TV boxes. Works wtih CFL lighting. These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. - anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 120 feet away.

The new 95 and 85 series IR kits from Xantech feature five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. Xantech is the only manufacturer building an IR product line around this level of advanced circuit design. IR is a crucial control "backbone" in nearly every A/V system installation, and Xantech is committed to IR that works perfectly every time which demands such a no-compromise approach. If it is an IR problem and Xantech can't solve it, nobody can. All Xantech IR series kits feature advanced circuitry which passes the native IR carrier and data signals faithfully and reliably to ensure proper control of all A/V components. This is superior to the scheme used in many competitive products. They try to "strip" and regenerate the carrier signal, resulting in incomplete and erroneous IR commands which a source unit often cannot execute competently.Versatile IR solution that works with remotes up to 80 feet away. 85-series is also compatible with all types of TV's (plasma, LCD and LED) as well as all satellite and cable TV boxes. Works with CFL lighting.

These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. - anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 80 feet away. Depending on remote control output strength and ambient conditions.

XANTECH HD44C 4X4 HD Switcher. Distributes 4 component-video sources to any combination of 4 component-video displays...

Xantech 49010DKIT Standard Designer Micro Link IR Kit

Xantech 781ERGPS Regulated Power Supply 12VDC 500mA

Xantech 782ERGPS High Current Power Supply

Xantech CC12 is an IR Remote Controlled Double Pole Double Throw Relay Module. It provides dry contact closures to satisfy a variety of uses, such as activation of screen drops, projector lifts, etc. The switching is accomplished by way of infrared commands originating from a Xantech RC68+ Programmer (or RC68 Programmer). It can also be switched by a DC voltage applied between the CI (control input) and GND terminals. The RC68+ commands are "taught" to learning devices and passed to the IR IN, and GND input terminals of the CC12 signal input terminals via Xantech IR Receivers, Keypads and Connecting Blocks.The CC12 can be used in any application that requires dry switch closures activated by IR commands or by a DC control voltage; up to the capacity of the DPDT 5A/30V DC relay. Some of the more likely applications would be to activate video projector lifts, screen drops, drape pulls, etc., in home automation systems.

Xantech Dual Designer Emitter, 10 Pack (284D10P)

Xantech HL85 Hidden Link? Shelf Top Plasma/LCD/LED/CFL Friendly IR Receiver

Xantech KM1FWRP 12 Button Function Keys for the SmartPad

Xantech MRC88 Keypad

Xantech RGC11 Remote Gain Control Module

Xantech XLIP800 Web Intelligent Controller