ClassificationId = 11039361 (page 1 / 1)
282X - Xantech
283D5P
28DES
29195DBKIT Plasma Proof Designer Hidden Link IR Kit
29210
29387
37110
40432
48010DB
48085DSKIT
Audio and Video Cables - Pro Audio and Video Cables | Category: Xantech, Cable
Buy Xantech XT-4K-VIP-ACM, 4K UHD Video Over IP Advanced Control Module - Prime Buy
CPL94B - Xantech
Designer Dual Blink Emitter
EN85K
Energy Transformation Systems VGA Video Baluns Set: 1-PV931 & 1-PV932 Review Energy Transformation Systems
Extended Range (up to 120 feet)<br />For use with all types of cable boxes, satellite boxes, remote controls and TVs<br />Works with LED, LCD & plasma TV's and CFL lighting<br />White, brass & black bezels included to match d?cor</p>
Featuring five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. The Xantech <b>HL85BK</b> LCD/CFL friendly Hidden Link IR Kit includes an HL85 table top infrared receiver, 1x4 connecting block and 4 IR emitters.</p><p><b>Native Carrier Frequency Transmission Circuitry</b><br />Nearly every IR system relies on a carrier frequency to "carry" the commands to their destination. Some consumer electronic devices, especially digital cable and satellite TV boxes, are very picky regarding carrier frequency accuracy. At times, they may not accept remote commands unless precisely the right carrier frequency is present.</p><p>Unfortunately, many IR repeater systems take a technical short-cut and simply strip away the carrier frequency upon reception instead of intelligently identifying and removing the unwanted noise and interference from it -- and then attempt to regenerate or replicate the carrier frequency. This can result in incomplete or incorrect IR signals and a lot of frustration and expense for a system designer.</p><p>Xantech takes no shortcuts here. Rather than trying to make a copy of the carrier frequency to compensate for inadequate parts and circuit design, Xantech uses better-quality components and circuitry that can accurately process the original carrier frequency. By doing so, a Xantech IR kit eliminates the noise and interference instead of the carrier itself, and transmits the original IR signal in its correct form to the rest of the system. The result is a dead-on accurate signal transmission -- minus all the noise and distortion.</p>
HD44CC5
HL95BK
INA-REMPJ001
INJ94
LP-40-IR-01
LP-41-IR-01
LP-50-IR-01
LS-100-01-WH-D
Listen Technologies LSTN-LR-5200-IR Advanced Intelligent DSP IR Receiver
ML85K
Officially licensed team fan gear by the . Officially licensed by the . Top-Quality, manufacured by XANTECH .
PEX03
RF2IR
Security Systems & Surveillance Equipment | JMAC Supply
Security Systems & Surveillance Equipment | JMAC Supply
Security Systems & Surveillance Equipment | JMAC Supply
Security Systems & Surveillance Equipment | JMAC Supply
Security Systems & Surveillance Equipment | JMAC Supply
Security Systems & Surveillance Equipment | JMAC Supply
SquareD IOX2411 I/O EXTENDER MODULE 4 D IN & 2 D OUTPUT MODULE 4 D IN & 2 D OUTPUT - MROSupply.com
The <b>282D</b> Designer Emitter contains a tiny infrared LED housed in a miniature, designer styled, black appearing, injection molded plastic shell. It emits IR (infrared) control signals sent to it by IR receivers or other Xantech controllers. The 282D can be installed directly on the IR sensor window of the controlled device or other suitable locations.</p>
The <b>283D</b> Blink-IR Designer Emitter contains a small Infrared LED housed in a miniature, designer styled, black appearing, injection molded plastic shell. Unlike other emitters, the 283D emits visible red light in addition to IR (infrared) control signals when activated by IR commands sent to it by IR receivers or other Xantech controllers. The 283D is designed to be installed directly on the IR sensor window of the controlled device.</p>
The IR-RXC External IR Receiver extends IR reception for the 232-ATSC, 232-STS, and the ICC2-ATSC/VDC/IRC. Using the included swivel mount, the unit can mounting in any position and aimed for best reception. Powered by the external IR IN input on the tuner, the IR-RXC is switchable for sensing Contemporary Research high-frequency 57 KHz (default) and low-frequency 38 KHz IR, the IR-RXC can be mounted in any position.</p>
The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable - as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.</p>
The Southwire WG-01 wire router is a device that helps to install circuit wire in an enclosure without any damage. It is a universal adapter that is easy to use and helps to reduce the need to route the circuit wire into a raceway or conduit.
The new 95 and 85 series IR kits from Xantech feature five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. Xantech is the only manufacturer building an IR product line around this level of advanced circuit design. IR is a crucial control "backbone" in nearly every A/V system installation, and Xantech is committed to IR that works perfectly every time which demands such a no-compromise approach. If it is an IR problem and Xantech can't solve it, nobody can. All Xantech IR series kits feature advanced circuitry which passes the native IR carrier and data signals faithfully and reliably to ensure proper control of all A/V components. Premium kit for high-end and custom installations requiring the ultimate in IR control.95-series works with remotes up to 120 feet away. Compatible with all types of TV's including plasma, LCD and LED, and all satellite and cable TV boxes. Works wtih CFL lighting. These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. - anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 120 feet away.</p>
The new 95 and 85 series IR kits from Xantech feature five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. Xantech is the only manufacturer building an IR product line around this level of advanced circuit design. IR is a crucial control "backbone" in nearly every A/V system installation, and Xantech is committed to IR that works perfectly every time which demands such a no-compromise approach. If it is an IR problem and Xantech can't solve it, nobody can. All Xantech IR series kits feature advanced circuitry which passes the native IR carrier and data signals faithfully and reliably to ensure proper control of all A/V components. This is superior to the scheme used in many competitive products. They try to "strip" and regenerate the carrier signal, resulting in incomplete and erroneous IR commands which a source unit often cannot execute competently.Versatile IR solution that works with remotes up to 80 feet away. 85-series is also compatible with all types of TV's (plasma, LCD and LED) as well as all satellite and cable TV boxes. Works with CFL lighting.</p>
These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. - anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 80 feet away. Depending on remote control output strength and ambient conditions.</p>
VA-E
VAS-E
VC5-1P
VGA-C5EX4
VGA-C5EX8
Vishay Dale TSOP32338
X10 Powermid PM5900 Remote Control Extender Kit - Includes a Transmitter and Receiver - (Infrared Only No Video): Maxedbuy.com
XT-CAT-ARC-KIT
XT-HDBT-EX70-4K-KIT
Xantech 49010DKIT Standard Designer Micro Link IR Kit
Xantech Dual IR Emitter, Bulk packed (284DBULK)
Xantech HL95B Hidden Link Universal IR Receiver. Very small package, only 2.00"L x 3.15"W x 0.70"H. System testing re...
Xantech KM1FWRP 12 Button Function Keys for the SmartPad
Xantech RGC11 Remote Gain Control Module