The Securitytronix <b>ST-ALLIN1-TEST2</b> 7 inch touch screen IP camera monitor and tester is designed for maintenance and installation of IP cameras, HD over coax cameras (TVI, CVI, SDI, AHD), and analog cameras as well as other security equipment. The 1280 x 800 resolution enables it to display HD cameras and analog cameras in high resolution. The unit supports many HD over coax PTZ, ONVIF PTZ and analog PTZ controls. The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, perform PING tests and IP address scanning. You can use the blue cable tester to check the termination and cable type of network cables. Other functions include providing 24W PoE power to your IP camera, an LED Flashlight, 12VDC 2A power output and much more. Its portability, user-friendly design and many other functions make the IP buddy+ all in 1 an essential tool for all installers or technicians.</p>
The Shure <b>BLX288/B58</b> is a cost-effective wireless handheld microphone system for two presenters, teachers, or lecturers which offers quality sound, simple setup, and dependable performance right out of the box. It includes the compact and lightweight BLX88 dual-channel tabletop receiver with internal antennas, ideal for portable use.</p><p>The BLX288/B58 also includes two handheld transmitters, each equipped with an integrated Beta 58A dynamic supercardioid microphone capsule. The receiver features one-touch QuickScan frequency selection to quickly search 98 available frequencies and locate a clean RF channel in case of interference. The system provides up to 14 hours of continuous use with four AA batteries, at a range up to 300'. Up to 12 mic channels can operate simultaneously in each frequency band.</p><p>This streamlined system is well suited for live performances and events in small venues, wedding halls, and houses of worship as well as conference, educational, and corporate facilities.</p>
The Shure ULX-D Digital Wireless Combo Microphone System delivers transparent, 24-bit digital audio transmission, uncompromising audio clarity, extremely efficient RF performance, secure signal encryption and advanced recharging. This system includes the ULX-D receiver, ULXD2 handheld transmitter with SM58 microphone capsule, ULXD1 bodypack and WL185 lavalier.</p><p>Both the transmitters and receiver are made of galvanized steel, making it rugged enough for any application. Its 24-bit / 48kHz digital audio fidelity, wide frequency response and 120 dB dynamic range result in an audio quality that's synonymous with wired microphones.</p><p>Its efficient and stable RF performance features up to 64MHz overall tuning range, support for 14 active transmitters in one 6 MHz TV channel and 60 compatible channels on one frequency band. The ULX-D's optimized scanning automatically finds and deploys the cleanest frequencies available and interference detection alerts provide instant confirmation when interference is present.</p><p>The system's 256-bit signal encryption sends RF signal securely. Additional features include intelligent Shure battery circuitry for efficient battery charges, comprehensive LCD displays, XLR and 1/4" phone balanced outputs, Ethernet network capability much more.</p>
The Sonifex <b>AVN-CU2-DANTE</b> is a portable commentator unit. Using Dante® AoIP together with 4 wire connections the AVN-CU2-DANTE bridges the gap between old and new technology, allowing the ease of connectivity & functionality of AoIP, together with the legacy connections needed to operate with the existing infrastructure in some stadia and sports grounds.</p><p>This Dante® commentary unit is smaller than the existing Sonifex CM-CU1 single 4-wire unit whilst packing in more features. It's been designed from the ground up to be configurable for different situations with config files that can be saved and recalled for quick setup. Additionally, buttons and rotary encoders can be locked out from use, if the unit is being operated by less-technical commentators.</p><p>The unit supports up to 16 input and output AoIP channels and up to 16 simultaneous input and output AoIP streams. Stream setup to and from the unit is initially via Dante® Controller with more detailed configuration performed using the built-in web GUI. The power of this unit lies in the impressive mix engine which overlays the usual Dante® Controller settings. Once Dante® flows have been made, the mix engine allows inputs and outputs to be mixed freely to AoIP or physical inputs and outputs, controlled using the programmable buttons and rotary encoders on the unit. Remote operation of the unit is available using the Web-GUI allowing independent control of it from any network connected area.</p><p>The AVN-CU2-DANTE provides two locking mic/line inputs, each with +48V phantom power indication and a wide, adjustable gain range. It has two stereo headphone outputs with locking 6.35mm jack sockets, suitable for operation by two commentators.</p><p>It's powered using Power over Ethernet (PoE), using Neutrik EtherCON connectors, with primary and secondary ports for power and data redundancy. There's an additional 4 pin XLR 12V DC input. The 6 x push-button rotary encoders and 12 x key-cap buttons are fully configurable, to control input & output levels and panning.</p><p>Each rotary encoder has a separate colour-coded meter section showing the channel name, detailed level metering, left/right panning and a limiter indication, on a bright daylight reading display. Colours can be programmed per encoder to quickly identify particular source groups, so headphone source selection becomes intuitive. Metering is available per input/output, with output metering configurable as pre or post level adjustment. The top of the display shows output metering, a limiter indication and the name of the output. A limiter is available on every output.</p><p>Four wire I/O on rear panel RJ45 connectors provide an AES3 or analogue input and output that can be assigned as mic outputs (line level), talkback outputs, programme inputs or talkback inputs as desired. In addition, the AES/analogue connections can be used as an insert or exit point into/out from the AoIP network. The unit has dual redundant network ports on both RJ45 (PoE using 2 x Neutrik EtherCON® connectors) and SFP cages. There are 10 x configurable GPIO on a 15 way D-type connector with 1 x switched changeover output.</p>
The SoundTools <strong>WallCAT</strong> transports audio easily and conveniently from one room to the next by utilizing shielded CAT5, CAT5e, CAT6 or CAT7 cable. The highlight of this XLR extender is its compatibility with balanced analog, digital, AES/EBU, DMX and Clear-Com signals. </p><p>Every connection you need, including 4 Neutrik XLR connectors in front and 2 Amphenol RJ45 connections in back, come pre-installed and clearly labeled. The high-quality brushed aluminum and stainless steel mounting screws (included) are resistant to rust and most wear-and-tear.</p><p>SoundTools Wall CATs require shielded (STP/FTP) Cat cable to function properly. They are compatible with 48-volt phantom power. Using several SoundTools WallCATs the SuperCAT cable in your building installation will allow you to run four channels of clear audio<br />and COM signals from one room to another or to multiple rooms at once. Combine with the CAT Box, CAT Rack, and/or CAT Tails for the ultimate audio-over-Cat5 experience.</p><p><strong><i>Please Note:</strong> SoundTools CAT branded products REQUIRE shielded CAT5 CAT5e CAT6 or CAT7 cable. Also note that ALL Rat Sound Category 5/6/7 extender products ( i.e. CAT Rack, CAT BOX. WallCAT, etc.) will travel 100 meters (330 feet) and all are compatible with balanced analog, digital, AES/EBU (110 ohm), DMX and Clear-Com signals.</i></p>
The SRCOOL24K SmartRack 24,000 BTU 208/240V Portable Air Conditioning Unit cools, dehumidifies and filters the air in your server room, data center or other environment with heat-sensitive equipment. The compact, portable unit fits into just 4 square feet of floor space. It is designed for primary, supplemental or backup cooling of IT equipment to prevent shutdowns, malfunctions and costly downtime caused by overheating or fluctuating temperatures.</p><p>The self-contained SRCOOL24K packs 24,000 BTU/h (7kW) of cooling capacity into a rack-width chassis. A built-in evaporator expels condensation through a directional exhaust duct, eliminating the need for a floor drain or water collection tank. The SRCOOL24K also dehumidifies and filters the air, providing better air quality that can enhance equipment performance. Efficient close-coupled cooling reduces energy use and operating costs.</p><p>Installation is quick and easy and does not require disruptive construction or the costly expense of hiring a plumber or HVAC specialist. The unit rolls into place on durable built-in casters. The NEMA L6-20P plug connects to a standard 208/240V 20A outlet. The SRCOOL24K restarts automatically after power failures, and a built-in timer supports unattended shutdown and startup.</p><p>The included SRCOOLNET2 network management card lets you monitor temperatures, receive alerts, review logs, automate operation and control settings from anywhere via SNMP, web browser, SSH or telnet. The SRCOOLNET2 includes the ENVIROSENSE remote sensor, which lets you monitor temperature and humidity up to 12 feet away from the SRCOOL24K.</p>
The SRCOOL7KRM Rackmounted Air Conditioning Unit pumps 7,000 BTU/h (2.0 kW) of close-coupled cooling power into your IT equipment to prevent shutdowns, malfunctions and failures caused by overheating. This space-saving, energy-efficient unit is perfect for data centers, server rooms, network closets and other environments with heat-sensitive rack-mounted equipment and limited floor space. The self-contained SRCOOL7KRM mounts just like any other rack equipment in 8U of space at the top or bottom of a rack enclosure.</p><p>A magnetic air dam attaches to the front door of the rack enclosure to ensure that equipment draws cool air from the SRCOOL7KRM instead of drawing warm air from the room. Because it only cools the equipment inside the rack enclosure, the SRCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRCOOL7KRM filters the air, and its built-in evaporator eliminates condensation, as well as the need for a floor drain or water collection tank. The 7-foot cord plugs into a standard 15A (NEMA 5-15R) outlet.</p><p>The unit restarts automatically after power failures, and you can use the built-in timer to schedule unattended shutdown and startup. The intuitive control panel includes a digital display and diagnostic LEDs to communicate operating conditions at a glance. The optional SRCOOLNET2 remote management accessory (sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet. The SRCOOLNET2 accessory also includes an ENVIROSENSE temperature and humidity sensor that allows you to link cooling output with temperature readings up to 12 feet away.</p>
The SRW12USDPG SmartRack 12U UPS-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds.</p><p>The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation.</p><p>The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.</p><p>The SRW12USDPG comes fully assembled and ready to mount to the wall, or use Tripp Lite?s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 24.5 inches deep, such as network switches, UPS systems and related battery packs and cabling.</p>
The StarTech <b>45PATCH50RD</b> Cat5e Patch Cable (50 ft) meets or exceeds all Cat 5e specifications to ensure reliable Ethernet network connections, and features a durable red PVC jacket that enables you to color code your network cable runs as needed. To ensure long-lasting performance, this high quality Cat5e patch cable features a snagless design that protects the RJ45 connector clips from damage and makes the cable less prone to snagging during installation. The cable also features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could decrease network performance. Constructed of only top quality materials, this Cat5e Patch Cord delivers reliable performance and is backed by our Lifetime Warranty. 100% Copper - a better value. StarTech Cat5e cables are manufactured using high-quality copper conductors. While many cable manufacturers offer a "cheaper" cable, based on a copper-coated aluminum core, we make no compromises on quality to ensure you receive top value and performance for your network cable investment. 24 AWG Wire. This Cat 5e cable is constructed with 24 gauge copper wire, to support a broad range of Ethernet applications such as Power over Ethernet (PoE). Because we use a high quality copper wire, our cables easily sustain the power required for Power over Ethernet applications, whereas the inferior quality offered by copper-coated aluminum cables may be subject to insufficient power delivery, heat buildup, equipment damage and potentially, fire. 50-micron Gold Connectors. This RJ45 patch cable offers high quality connectors comprised of 50-micron gold, to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion.</p>
The StarTech <b>C6PATCH50RD</b> 50ft Cat 6 Patch Cable meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections, and features a durable red PVC jacket that enables you to color code your network cable runs as needed. To ensure long-lasting performance, this high quality Cat 6 patch cable features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could decrease network performance. Constructed of only top quality materials, this Gigabit Patch Cable delivers reliable performance and is backed by our Lifetime Warranty. 100% Copper - a better value. StarTech Cat6 cables are manufactured using high-quality copper conductors. While many cable manufacturers offer a ""cheaper"" cable, based on a copper-coated aluminum core, we make no compromises on quality to ensure you receive top value and performance for your network cable investment. 24 AWG Wire. This Cat6 cable is constructed with 24 gauge copper wire, to support a broad range of Ethernet applications such as Power over Ethernet (PoE). Because we use a high quality copper wire, our cables easily sustain the power required for Power over Ethernet applications, whereas the inferior quality offered by copper-coated aluminum cables may be subject to insufficient power delivery, heat buildup, equipment damage and potentially, fire. 50-micron Gold Connectors. This molded patch cable offers high quality connectors comprised of 50-micron gold, to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion.</p>
The StarTech <strong>CDP2DPMM6W</strong> USB-C™ to DisplayPort cable offers a convenient solution for directly connecting your DisplayPort over USB Type-C™ device to your DisplayPort monitor or projector, at up to 1.8 m (6 ft.) away. The adapter works with USB-C devices that support DP Alt Mode, such as the MacBook, ChromeBook Pixel™ and Dell™ XPS™ models 15 and 13. It's also compatible with Thunderbolt™ 3 ports.</p><p><strong>Seamless, clutter-free installation with your MacBook or HP ENVY</strong><br />At 6 ft. (1.8 m) in length, this DisplayPort cable delivers a compact connection that eliminates excess adapters and cabling, ensuring a tidy, professional installation. Plus, the USB-C cable?s all-white design makes it an attractive accessory for your HP ENVY or MacBook with USB-C. If you're looking for a shorter white USB-C to DisplayPort cable, StarTech.com also offers a White 3 ft. (1 m) USB-C to DP Cable (CDP2DPMM1MW).</p><p>While the adapter looks great next to computers like your Mac and HP ENVY, it works with any USB-C computer that supports DisplayPort Alt Mode, such as your Dell XPS, Ultrabook™ or other Windows® laptop. But if you're looking for a black cable to match your workstation, StarTech.com offers a full line of black USB-C to DisplayPort cables including: a Black 3 ft. (1 m) USB-C to DP cable (CDP2DPMM1MB), and a Black 6 ft. (1.8 m) USB-C to DP cable), which enables you to choose the right color and cable length for your custom installation needs.</p><p><strong>Hassle-free connection with USB Type-C</strong><br />The adapter cable is easy to connect, through the versatility and convenience of the USB Type-C port on your device. USB-C is a reversible connector, so it doesn't matter which way you plug it in, the adapter will always connect, saving you the frustration of trying to insert it correctly when you're docking your computer to your workstation or office hot desk.</p><p><strong>Astonishing picture quality with support for 4K at 60Hz</strong><br />At four times the resolution of high-definition 1080p, you?ll be amazed at the picture quality of a 4K 60Hz monitor or television. This adapter cable lets you harness the video capabilities that are built into your USB Type-C connection, to deliver the astonishing quality of Ultra HD to your 4K display. </p><p>Plus, the adapter is still compatible with lower resolution displays, such as 1080p, which makes it a great accessory for your current home, office or other HD work environment, while future-proofing for 4K 60Hz implementation.</p><p><strong>Note:</strong> Your USB-C equipped device must support video (DP Alt Mode) to work with this adapter.</p>
The StarTech <strong>HKLP25</strong> 25 ft.?roll of hook-and-loop cable tie makes it easy to keep?your cables neat and tidy by binding them together or binding them to a structure. The self-gripping fabric can be cut to any size and is 3/4 in. (19 mm) wide, which offers?a slim wrap-around solution for any computer, appliance or electronics cable, in virtually any environment.</p><p><strong> Hassle-free cable management</strong><br />This roll of cable tie offers a quick and easy solution for bundling cables together and securing your cables for better routing. Properly routed cables help protect your equipment, by reducing cable tension and preventing excessive heat caused by unorganized cables restricting airflow.</p><p>It uses a hook-and-loop fastening method to ensure a sturdy grip that's easy to apply. With the hook mechanism on one side of the tape and a loop mechanism on the other, you can easily wrap it around your cable bundle, and fasten the cable tie by draping it over itself.</p><p><strong>Customize the length of your cable tie</strong><br />Whether your bundle consists of two small-gauge cables or many large-gauge cables, you can rest assured this roll of cable tie will handle it perfectly. You can cut the hook-and-loop fabric to size using household scissors, meaning you can choose the perfect length for your specific application.?</p><p><strong>Versatile fastening solution</strong><br />The versatility of the cable tie makes the roll the ideal tool for you to keep on hand in your office, server room or industrial environment.</p><p>While the most common use for this hook-and-loop fabric is binding and routing cables, you can also use it for other materials in your IT environment such as tools or raceways. The ties are easy to remove, reusable and adjustable, avoiding the hassle and waste of traditional zip ties.?</p>
The StarTech <strong>MASFP1GBSXST</strong> Gigabit fiber SFP is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco switches and routers that support the?Cisco Meraki MA-SFP-1GB-SX transceiver module, as well as?other major brands of networking equipment.?</p><p>This 1000Base-SX SFP delivers Gigabit connectivity over multimode fiber cable, with a range of up to 550 m (1804 ft.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty.</p><p><strong>Built for reliable network performance</strong><br />This multimode?SFP transceiver is manufactured by StarTech to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products.</p><p><strong>Fully compatible with Cisco Meraki and other major brands</strong><br />The?MM Gigabit SFP is engineered to the highest quality standards and is 100% Cisco Meraki?compatible, equivalent to the?Cisco Meraki MA-SFP-1GB-SX SFP transceiver. The StarTech SFP transceiver is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment.</p><p>You can be assured that the use of StarTech SFP products should not affect the warranty protection of your networking equipment.?</p><p><strong>Convenient and scalable</strong><br />Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a multitude of Gigabit networking devices.</p><p>Ideal for use in switches, routers, and other networking equipment, the SFP provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SFP supports?multimode fiber?cable?with a maximum distance of 550 m or 1804 ft.,?and?maximum data rates of up to 1.25Gbps. This GbE fiber SFP also supports?Digital Diagnostics Monitoring (DDM / DOM). ?</p>
The Steren <b>BL-526-108</b> Optical Power Meter is small, light and easy to carry with a large LCD screen. It can be widely used in the test of LAN, WAN metropolitan network. It can be used to test Fiber loss accurately, check the Fiber continuity and help to evaluate the transmission quality of Fiber chain with the laser source.<br /> <br />The tester checks the Optical Power within the range of 800 ~ 1700nm wavelength, with the unit as nW, ?W, mW, dB, dBm, its display resolution level and test accuracy are high. There are six kinds of wavelength calibration points: 850nm, 1300nm, 1310nm, 1490nm, 1550nm, and 1625nm. It can be used for linearity and non-linearity testing and displays both direct and relative test of Optical Power.</p><p>Steren Electronics Optical Power Meter is designed to provide the field technician with the right set of measurements, in an easy to read pass/fail format. It is used to test Fiber loss accurately, check Fiber continuity and helps to evaluate the transmission quality of Fiber chain with the laser source.</p><p>Save time and money by eliminating future truck rolls and customer service complaints. Technicians can use this device to verify the passive fiber jumper quality and functionality on the first visit.<br /></p><p>A technician can power-up and connect, using the included set of adaptors, the new Optical Power Meter Tester effortlessly. Within minutes,a technician can use this tester to verify a new jumper or troubleshoot a problem in an existing installation.</p>
The Stewart Audio <b>FLX-E-80-4-LZ</b> is a 4 channel, 4/8 Ohm, 1/2 rack amplifier delivering 80W per channel with built in DSP, ethernet control & reporting, secondary RS-232 control, and remote volume control. </p><p>The FLX-E series of amplifiers is the most versatile 1/2 rack amplifier Stewart has ever produced. The FLX-E-80-4-LZ provides 80 watts from each of the four output channels into a 4 Ohm or 8 Ohm load. At the heart of the amplifier is a robust, internal, full-function DSP designed to solve a multitude of your audio problems in just one enclosure. The DSP includes a full cross-point mixer, EQ, filters, limiters and much more. An ethernet port makes programming simple, fast and repeatable for large installations. The ethernet, RVC, and Rs-232 interfaces allow volume control from a wide range of devices. You won't find a more flexible combination of power output and processing in a comparable package on the market today.</p><p><ins><b>Applications:</b></ins><br />Dante™/AES67 Network Audio<br />Hospitality Installations<br />Education<br />Conference Rooms<br />Houses of Worship<br />Room combining</p>