The Muxlab <strong>500763-TX</strong> HDMI over IP H.264/H.265 PoE Transmitter allows HDMI source equipment to be extended locally up to 330ft (100m) at up to 4K @ 30Hz resolution via Cat5e/6 cable and is compatible with the Muxlab 500762-RX Receiver to support point-to-point, point-to-multipoint and multipoint-to- multipoint configurations, Video Wall and Multiview capabilities in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 4K video @ 30Hz and streams the content to an H.264/H.265 Receiver, such as the MuxLab 500762-RX, to be displayed on a 4K monitor. The Transmitter may also send H.264/H.265 video streams to other H.264/H.265 compatible Receiving devices. The device supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.</p><p><strong>Applications:</strong><br /><li>Audio/Video Streaming over LAN, Wifi and Internet</li><li>Commercial and residential AV systems</li><li>Classroom projector systems</li><li>Digital signage</li><li>Boardroom systems</li><li>Medical information systems</li></p>
The MuxLab <strong>500777-TX</strong> HDMI/VGA/USB over IP PoE Wall Plate Transmitter allows HDMI, VGA and USB equipment to be connected up to 330ft (100m), with video supported at up to 4K (3840x2160) resolution @ 30Hz via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. The USB port may be used for extending various USB devices including Smart Boards. Point-to-multipoint and multipoint-to-multipoint configurations are also possible by connecting several Transmitters and Receivers to the same local Ethernet IP network via an Ethernet Switch. The HDMI/VGA/USB over IP PoE Wall Plate Transmitter also supports PoE (PD) if used with a PoE (PSE) Ethernet Switch. Additional Transmitters may be purchased separately depending on the intended application and number of units required.</p><p>For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet Switch must have Gigabit ports, Jumbo Frame capability, DHCP Server capability, PoE, and additionally support the IGMP communication protocol for the multipoint-to-multipoint case. MuxLab recommends using the Cisco SG300 or SG500 Series Managed Switches.</p><p>The MuxLab ProDigital Network Controller (500811) is available to simplify the configuration and utilization of the 500777-TX and other MuxLab IP based products via an Ethernet web interface. The MuxLab Control Android and iOS Application may also be used for connectivity management, in combination with the 500811 Network Controller.</p><p><strong>Compatible Receivers:</strong> 500758-RX, 500759-RX, 500770-RX and 500771-RX</p><p><strong>Applications:</strong><br />Commercial and residential AV systems<br />Classroom systems<br />Digital signage<br />Boardroom systems<br />Conference rooms and collaborative PC systems.</p><p><strong>Note:</strong> When installed in an electrically noisy environment, an STP cable must be used. Also, crossconnection reduces the effective distance depending on the grade of twisted cable used.</p>
The MXL "OverStream Bundle" (OS 1 BW & <b>OS 1 KR</b>) is a bundle that comes with a 990 Blizzard or <b>990 Blaze</b>, a SMP-1 (Shock Mount/Pop Filter) and a MXL BCD Stand.</p><p><b>MXL 990 Blaze - LED Condenser Microphone</b><br />The MXL 990 Blaze is a large-diaphragm condenser microphone that captures sweet, silky high ends, tight lows and midrange, and has two glowing blue LED lights in the mic grille. With a clean white body, the MXL 990 stands out under the glow of its LED lights during recording, and it captures a remarkably clear sound whether it's in a professional recording studio or an at-home gaming setup. </p><p>It has a wide frequency response to complement a wide range of voices, both male and female, and it has a durable, all-metal construction for long-lasting use. Perfect for gamers, podcasters, and studio musicians alike.</p><p><b>Note</b>:This is a solution for gamers and podcasters who already have an Audio Interface.</p>
The N200-001-BK Cat6 Gigabit Molded Patch Cable ensures ultra-fast performance throughout your Cat5/5e/6 network application. It connects high-speed network components like computers, printers, video game systems, Blu-ray players, copy machines, routers and modems in a home or office Cat5/5e/6 application.</p><p>This one-foot black cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG 4-pair stranded UTP with a staggered-pin plug design and male RJ45 connectors, each cable provides high-speed connections up to one Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum.</p><p>Featuring a PVC jacket, the N200-001-BK is constructed of top-quality materials for long life and durability. Copper contacts are gold-plated to ensure an accurate signal transfer. Molded integral strain relief guarantees a secure connection. Meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11).</p>
The N200-100-BL Cat6 Gigabit Molded Patch Cable ensures ultra-fast performance throughout your Cat5/5e/6 network application. It connects high-speed network components like computers, printers, video game systems, Blu-ray players, copy machines, routers and modems in a home or office Cat5/5e/6 application.</p><p>This 100-foot blue cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG 4-pair solid UTP with a staggered-pin plug design and male RJ45 connectors, each cable provides high-speed connections up to one Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum.</p><p>Featuring a PVC jacket, the N200-100-BL is constructed of top-quality materials for long life and durability. Copper contacts are gold-plated to ensure an accurate signal transfer. Molded integral strain relief guarantees a secure connection. Meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11).</p>
The new 190X Aluminum 3 section tripod is also available as a kit with the new XPRO Fluid head with quick-release camera plate. </p><p>The key feature of the 190X is the ground level adaptor which allows great shooting creativity. Once placed on the top casting and combined with the 4 leg angles, it enables the tripod to reach ultra-low positions. </p><p>The legs of the 190X tripod are fast to extend and adjust, thanks to the Quick Power Lock levers that block and unblock each leg section. The special design of the QPL levers allows a more comfortable and stronger single-handed grip of the leg locks. From a folded position, the sections of each leg of the tripod can be released in a single movement. The QPL lever design also offers more powerful locking of each section, meaning the tripod is more stable and rigid than with traditional lever designs. Intuitive and ergonomic leg angle selectors allow each leg to be independently and solidly set to any of the pre-set angles, allowing even greater positioning freedom. </p><p>The top casting of the 190X has an Easy Link connector to support a photo or video accessory (such as a LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, turning the tripod into a practical mobile studio. </p><p>The new XPRO fluid head is the best choice for photographers wanting to start shooting videos to expand their creativity. Thanks to its body in Aluminium and in Adapto polymer, it is compact, portable and lightweight, weighing a mere 0.7 kg. The XPRO Fluid head has 2 levels of fluidity to switch between hard and soft fluidity according to the kind of movement preferred and to the kind of gear in use. The quick release system is used to accommodate the 200PL plate so there is no need to use different plates when switching from photo to video. </p><p>The 190X and the MHXPRO-2W head are made in Italy by Manfrotto.</p>
The PAG <strong>9709L</strong> is a plug-in 2-pin Lemo output connector for use with the 9709 PowerHub (V-Mount).</p><p>The PAG <strong>9709 PowerHub</strong> is a compact and configurable camera accessory power device, designed for use with the PAGlink system of linking batteries.</p><p>The PAGlink battery system is designed for high-load camera set-ups; the linked batteries provide up to 12A, enabling you to power simultaneously the camera and multiple 12V accessories, such as a camera light, a monitor, audio and transmission devices. The PowerHub provides the multiple outputs that are required to do this.</p><p>PowerHub incorporates four D-Tap output connector units which have been designed to be interchangeable with other connectors of your choice, such as Lemo (2-pin), Hirose (4 pin) or 2.1mm (PP90), available separately.</p><p>The outputs can be positioned to the left or right side of the camera, allowing you to configure the PowerHub to your individual requirement. A USB module (5V, 1A) has also been incorporated allowing you to charge your smartphone, or power other devices.</p><p>The PowerHub can be used sandwiched between two PAGlink batteries, thereby maintaining the system's hot-swap feature, or connected to the rear battery, where an accessory bracket can be mounted to the unit's face. The ultra-compact and lightweight PowerHub measures just 12mm in depth, when installed between batteries. </p><p><strong>NOTE:</strong> The PAGlink PowerHub Model 9709 can ONLY be used with PAGlink V-Mount batteries. It draws power from their upper linking contacts. It cannot be used connected directly to the camera as it has no camera V-Mount contacts.</p>
The Patton <b>SN4316/JO/UI</b> SmartNode™ 4300 VoIP Gateway provides 12 to 32 analog FXS or FXO interfaces to connect phones, fax or PSTN trunk lines to your IP-based communications (IP PBX, UC systems and SIP Trunks).</p><p>Like every SmartNode™, the SN4300 supports every industry-standard CODEC to deliver toll-quality voice on every call. The Unified Communications Agent™ (UCA) provides any-to-any multi-path switching (simultaneous SIP, H.323, ISDN, and POTS calls with routing and conversion between TDM/PSTN and IP/Ethernet networks plus T.38 and SuperG3 FAX). VoIP-over-VPN with voice encryption provides secure voice and data via IPsec with AES/DES strong encryption and automated keying via Internet Key Exchange (IKE). In addition, advanced call-router functionality includes least-cost call routing with flexible dialed-number plan support.</p><p>The SmartNode survivability suite provides PSTN fallback to ensure business continuity in case the IP network fails. In addition, SmartNode delivers a smooth transition to VoIP with strong number portability support accepting incoming calls from the PSTN throughout the VoIP service provider's number porting process.</p><p>Preserve investments in legacy phone equipment while taking the next steps toward unified communications with the SN4300 VoIP Gateway. Providing 12 to 32 FXS or FXO interfaces and one 10/100/1000 Ethernet, the SN4300 delivers a reliable, cost-effective solution for the Enterprise.</p>
The PDUMNH20HVAT 3.3/3.8kW Single-Phase 208/240V ATS/Monitored PDU provides remote power monitoring and enables redundant power for network devices with non-redundant power supply configurations. Ideal for data centers and server rooms, it mounts in 1U of space in EIA-standard 19-inch racks and features one L6-20R outlet?perfect for connecting a single device or a 0U 208/240V PDU with an L6-20P plug. Dual 10-foot input cords with L6-20P plugs connect to separate primary and secondary single-phase power sources. The PDU constantly evaluates the power quality of both input sources. Dynamic solid-state (TRIAC) automatic transfer switching allows the PDU to switch to the secondary source within 1?5 milliseconds should the primary source fail or become unstable to ensure your connected equipment operates without interruption.</p><p>Built-in Ethernet network interface allows remote access to the PDU for power monitoring, configuration, control and notifications via web browser, SSH, telnet or SNMP. Provides real-time load/current data with billing-grade accuracy (+/- 1 percent). Tiered access privileges allow both an administrator and a guest to log in. Automated alerts help prevent accidental overloads, power loss and downtime. Digital display indicates power availability, voltage, source A/B input status, output load and power factor, as well as temperature and humidity conditions with the optional ENVIROSENSE module (sold separately).</p>
The Pelican <b>1400</b> Protector Case is ideal for carrying and storing electronic measurement tools, DSLR cameras & lenses, camcorders & accessories, GoPro cameras & accessories, GPS units, compact drones, and even homemade first-aid kits!</p><p>Each case comes equipped with an automatic pressure equalization valve that allows the case to balance the interior pressure if there's atmospheric pressure changes. Lastly, the Pelican 1400 is crushproof, dustproof, corrosion proof, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your gear safe and secure.</p><p>Sensitive equipment needs protection, and since 1976 the answer has been the Pelican Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>1506</b> Air Case is ideal for carrying and storing DSLR cameras & lenses, camcorders & accessories, GoPro cameras & accessories, GPS units, portable HAM radios, small mixers & microphones, compact drones, and electronic measurement tools.</p><p>Supplied with layers of Pick-N-Pluck foam, you can custom shape the interior to give a secure fit to whatever your protecting. Each case comes equipped with an automatic pressure equalization valve that allows the case to balance the interior pressure if there's atmospheric pressure changes. Lastly, the Pelican 1506 is crushproof, dustproof, corrosion proof, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your gear safe and secure.</p><p>Pelican Air cases are the first in a series of remarkable innovations engineered by Pelican, the pioneers of protective cases. For over 40 years Pelican has designed and crafted the most influential protective cases in the world.</p><p>With the Air Series cases, Pelican redefined the future of protection with a remarkable union of light and tough. They are 40% lighter than the standard Protector Series cases. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>1510</b> Protector Case is the perfect travel case for photographers and videographers. This case is ideal for carrying and storing DSLR cameras & lenses, camcorders & accessories, compact travel tripods, on-camera monitors and lights, GoPro cameras & accessories, field mixers & microphones, compact drones.</p><p>Additional features include polyurethane wheels with stainless steel bearings and a retractable extension handle; both are great features to have when travelling a lot. Each case comes equipped with an automatic pressure equalization valve that allows the case to balance the interior pressure if there's atmospheric pressure changes. Lastly, the Pelican 1510 is crushproof, dustproof, corrosion proof, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your gear safe and secure.</p><p>Sensitive equipment needs protection, and since 1976 the answer has been the Pelican Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>1535TPKIT</b> is the TrekPak Case Divider Kit for the 1535 Air Series cases. The kit includes convoluted lid foam and bottom base foam, perimeter wall panels, 2 15" dividers, 2 20" dividers, 20 steel U-pins, and one cutting tool. Everything you need to kit out your case with the precision your equipment deserves.</p><p>At just 7/16" (1.1cm) thick these rigid panels form a precise grid of protection without wasting any space. The panels are held firmly in place with steel U-pins, which means you can reconfigure your TrekPak system - even in the field. Trimming the dividers is a snap! The included double blade cutting tool makes a perfect cut every time. Together with the included bottom foam and convoluted lid foam, the TrekPak system forms a 360° cocoon inside your Pelican case.</p><p>Pelican Air cases are the first in a series of remarkable innovations engineered by Pelican, the pioneers of protective cases. For over 40 years Pelican has designed and crafted the most influential protective cases in the world.</p><p>With the Air Series cases, Pelican redefined the future of protection with a remarkable union of light and tough. They are 40% lighter than the standard Protector Series cases. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>1560M</b> Protector Case is It's ideal for carrying and storing DSLR cameras & lenses, camcorders & accessories, on-camera monitors and lights, GoPro cameras & accessories, GPS units, gaming consoles, portable HAM radios, small mixers & microphones, digital DJ turntables, compact & medium-sized drones, and electronic measurement tools.</p><p>This is a great equipment case to have while on location shoots. Whether rolling up a grassy hill, traversing a gravel road, or snowy trails, the heavy duty 4"x1.5" polyurethane wheels with stainless steel bearings will stand up tp the challenge and help get your equipment where it has to go. It also comes with a retractable extension handle which makes carrying it through those environments much easier. Supplied with a layers of Pick-N-Pluck foam, you can custom shape the interior to give a secure fit to whatever your protecting. Each case comes equipped with an automatic pressure equalization valve that allows the case to balance the interior pressure if there's atmospheric pressure changes. Lastly, the Pelican 1560M is crushproof, dustproof, corrosion proof, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your gear safe and secure.</p><p>Sensitive equipment needs protection, and since 1976 the answer has been the Pelican Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>iM2100</b> Storm Case is ideal for carrying and storing handheld recorders & accessories, electronic measurement tools, wireless handheld & bodypack transmitters, DSLR cameras & lenses, GoPro cameras & accessories, two-way radios, and small, compact drones.</p><p>Each case comes equipped with an automatic pressure equalization valve that allows the case to balance the interior pressure if there's atmospheric pressure changes. The Storm cases have unique Press and Pull latches that lock automatically, but open with a light touch. Lastly, the Pelican iM2100 is crushproof, dustproof, corrosion proof, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your gear safe and secure.</p><p>Pelican Storm cases are the result of years of perfecting and testing in both the lab and in the field. Whether falling from a helicopter, crashing down rapids, or taking a hit on the highway, these cases can take the abuse. They are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>iM2620</b> Storm Travel Case is ideal for carrying and storing DSLR cameras & lenses, camcorders & accessories, on-camera monitors and lights, GoPro cameras & accessories, GPS units, gaming consoles, camera cages, small mixers & microphones, digital DJ turntables, compact & medium-sized drones, compact camera gimbals, and electronic measurement tools.</p><p>Supplied with layers of Pick-N-Pluck foam, you can custom shape the interior to give a secure fit to whatever your protecting. Additional features include polyurethane wheels with stainless steel bearings and a retractable extension handle. Each case comes equipped with an automatic pressure equalization valve that allows the case to balance the interior pressure if there's atmospheric pressure changes. The Storm cases have unique Press and Pull latches that lock automatically, but open with a light touch. Lastly, the Pelican iM2620 is crushproof, dustproof, corrosion proof, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your gear safe and secure.</p><p>Pelican Storm cases are the result of years of perfecting and testing in both the lab and in the field. Whether falling from a helicopter, crashing down rapids, or taking a hit on the highway, these cases can take the abuse. They are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>iM2720TPKIT</b> is the TrekPak Case Divider Kit for the iM2720 Storm Series Travel cases. The kit includes convoluted lid foam and bottom base foam, perimeter wall panels, 2 10" dividers, 2 23" dividers, 30 steel U-pins, and one cutting tool. Everything you need to kit out your case with the precision your equipment deserves.</p><p>At just 7/16" (1.1cm) thick these rigid panels form a precise grid of protection without wasting any space. The panels are held firmly in place with steel U-pins, which means you can reconfigure your TrekPak system - even in the field. Trimming the dividers is a snap! The included double blade cutting tool makes a perfect cut every time. Together with the included bottom foam and convoluted lid foam, the TrekPak system forms a 360° cocoon inside your Pelican case.</p><p>Pelican Storm cases are the result of years of perfecting and testing in both the lab and in the field. Whether falling from a helicopter, crashing down rapids, or taking a hit on the highway, these cases can take the abuse. They are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>
The Pelican <b>R40</b> Personal Utility Ruck Case is a great solution to keep all of your everyday essentials safe and secure. Ideal for keeping things like your smartphone, wallet, keys, cash, credit cards, IDs, cables, tools, small flashlights, small homemade first-aid kit, and any other everyday pocket-sized items you may need.</p><p>These are great cases to have if you're always on the go and if you're working around water because they are able to be submerged under 2 meters (6 feet) of water for up to 30 minutes. You can keep them in your vehicle, boat, gear cases, bags, and backpacks so they're always handy. The rubberized exo-skeleton bumpers molded around the ABS outer shell helps to protect the case against drops and falls. It also has a flexible lid organizer, which is removeable, and a rigid divider tray, both with a MOLLE-style loop system and VELCRO straps. Lastly, the Pelican R40 is crushproof, dustproof, corrosion proof, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your personal belongings protected.</p><p>Strategic organization features and trusted Pelican protection for your everyday life gear! Pelican cases are designed rugged and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA!</b></p>
The Pelican <b>V100C</b> Vault Case is ideal for carrying and storing handheld recorders & accessories, electronic measurement tools, wireless handheld & bodypack transmitters, DSLR cameras & lenses, GoPro cameras & accessories, and small, compact drones.</p><p>Supplied with layers of protective foam, you can custom shape the interior to give a secure fit to whatever your protecting. Each case comes equipped with an automatic pressure equalization valve that allows the case to balance the interior pressure if there's atmospheric pressure changes. Lastly, the Pelican V100C is crushproof, dustproof, weather resistant, watertight, and airtight! Used and trusted by the professionals, get yourself one today and keep all your gear safe and secure.</p><p>Built for hard use, high impact and supreme weather resistance, new Vault series equipment cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more travelers can afford, as only the 42-year veteran of hard knocks could deliver. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived and are proudly <b>made in the USA</b>!</p>