Units: ['pixels']

Products with this attribute (248851 total)

The Clear-Com <strong> CC-220-X4 </strong> is a Premium Lightweight Double On Ear Intercom Headset with a Field Removable Four-pin Female XLR for FreeSpeak and HelixNet Beltpacks. The CC-220 headset can be easily adjusted to accommodate the preference of any user. The microphone boom has a 300&deg; rotation to allow the microphone to be worn on the left or right side of the head. Users can make the headset larger or smaller by using the slide adjusts on either side of the headband. Cushioned with super-soft leatherette or foam padding, the headphones sit on the ear to provide a comfortable fit for users. A rotating, flexible gooseneck is included for optimal positioning. </p><p><b>Integrated Mute Switch Operation</b> <br />The CC-200 headset microphones can be turned on and off by simply moving the microphone boom! To turn ON the microphone, pull the boom gently downwards (past the 10 o'clock/2 o'clock position). To turn the microphone OFF, push the boom gently upwards (above the 10 o'clock/2 o'clock position). </p><p><b>Interchangeable Cabling</b> <br />The CC-220 headsets have been designed so that the cabling and connector type can be adapted quickly to the application. Users can order cables with different XLR connector choices and appropriate pin-outs. To change the connector cable in the field, simply disconnect the cable from the headset and exchange the cable with a standard Phillips screwdriver. The same process can be used to repair and replace a damaged cable on the fly.</p>
The ClearCom <strong> LQ-R2W4 </strong> is a 4-Port 1RU, 2-Wire LQ Series IP Intercom System Interface. LQ&reg; Series devices provide intercom connectivity for linking multiple systems together over IP networks, extending intercom channels to remote locations, adding mobile and virtual clients through Agent-IC&reg; and Station-IC&trade; respectively, SIP/VoIP telephony to existing intercom systems, and enabling extra audio I/O for both HelixNet&reg; and Eclipse&reg;HX systems. </p><p>LQ IP interfaces enable connection of 2-wire partyline, 4-wire or 4-wire with GPIO audio over LAN, WAN or Internet IP infrastructures. The LQ Series consists of compact LQ boxes and rack-mounted LQ-R panels, available in 2-, 4- or 8-port versions. The partyline ports are Clear-Com and RTS compatible. Two standalone partyline intercom circuits can easily be constructed by connecting two partyline ports. The 4-wire ports can interconnect with devices, such as analog ports of any matrix intercom system, analog telephone circuits, two-way radio gateways and audio consoles. A maximum of six LQ Series IP devices can be linked together in any 2-, 4-wire or 4-wire with GPIO combination. </p><p>LQ Series devices can connect to Eclipse HX frames via the IVC-32-HX Interface Card over LAN, WAN and Internet IP networks using the G.722 codec. Each LQ Series device can connect to up to eight IVC-32-HX ports from different IVC-32-HX cards or Eclipse HX frames. This allows you to remotely connect any LQ Series device directly into an Eclipse HX frame across any distance. LQ Series devices can link with HelixNet main stations using the HLI-ET2 module over LAN and WAN IP networks. This allows the main station to use the LQ ports as extra audio input and output to the HelixNet system. Linking to an LQ device also allows HelixNet users add Agent-IC clients and SIP or VoIP telephony connections to the HelixNet channels.</p><p><b>Please Note!</b> This item is just one component of a larger system. Please refer to the diagram for ideas and recommendations for your Clear-Com intercom system.</p>