DFRobot . DFR0357

<b>Description:</b><br><br>The Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.<BR><BR><b>Specification:</b><br><br>Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi<br>VGA output: HDMI to VGA converter supporting up to UXGA (1600x1200) and 1080p with 10-bit DAC<br>Audio: 3.5mm MIC in jack<br>3.5mm stereo audio jack<br>SPDIF output<br>Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)<br>Wireless: WiFi (IEEE 802.11b/g/n) with external antenna<br>IR sensor (38KHz)<br>USB Storage: Self-powered USB hub with 3 ports<br>Real-time clock (RTC): Based on DS3231SN with included CR2032 battery<br>GPIO Control: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current<br>Misc: Power output socket<br>Camera flex slot so camera can still be used with the expansion board attached<br>DIP switch to remove connection from RPi's pin header<br>Directly connected on top of the Raspberry Pi using the board GPIO header pins<br>No wiring nor soldering is required<br>Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards<br>Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!<br>Dimensions: 85 x 56mm (Same size as Raspberry Pi)<br>Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!<BR><BR><b>Shipping List:</b><br><br>X200 Raspberry Pi expansion board x1<br>HDMI adapter x1<br>USB adapter x1<br>2.4GHz WIFI antenna x1<br>nylon spacers (M3 x 20mm) x4<br>nylon screws (M3 x 6mm) x8