Dixon Valve & Coupling Products

All products from this brand (123 total)

DOT Push-In Straight Fem Connector 1/4" Tube x 1/8" FNPT
DOT Push-In Union 3/8" Tube to Tube
Double Bolt Clamp w/SC12 Saddles Plated Iron, Bolt-MB8500, Nut-MN8
Forged Brass Push-In Male Elbow 3/16" Tube x 1/8" Male NPTF
Generally acceptable for working pressure up to 150 psi (10 bar) at normal room temperatures. At very low pressures temperatures can approach 175 DegreeF or 79 DegreeC with no degradation of the fittings strength. Should not be used with compressed gas, acid based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, sulphuric acid and xylene. Meets FDA and NSF standards.
MAN BIOCK VLV .5-.75" TC TO PROC 1 PORT .375" BW
Mounting Bracket for L606-02 L606-03 or L606-04
Nylon female insert & _" NPT with a red vinyl washer. These Nylon fittings are non-corrosive. May be hand or wrench tightened GHT (Garden Hose Threads) and NPT (National Pipe Threads). 125psi maximum working pressure at 120 Degree F and the temp range is -40 Degree F to 200 Degree F.
Nylon Liqui-Fit Bulkhead Union w/ 1/4" Tube OD
Nylon/Brass Push-In Male Run Tee 5/16" Tube x 1/4" Male NPT
O'Ring, Seal & Gasket Kit for F74
Ribbed Die Crimps BFM525, BFM531 or BFL525, 1 Die=4 Segments
Ring Style Tamper Resistant Kit for B08, R00 or R08
Sight Disk Lock Nut for In-Line Lubricator
Standard Check Valve 3psi Cartridge Kit
Steel N-Series Converter 420968
Super King Steel Long Shank Fem w/ Brass Pin Lug Nut, 4" Female NPSM
Supplier: Dixon&amp;<br>Material: 300 Series Stainless Steel<br>ID: 2-1/2"<br>Width: 5/8"<br>Thickness: .030"<br>Weight (lb): 0.13<br>Use: For use with Fast-Lok tools: F1, F40, F100 For use with Super Strap Tools: 51960 screw action with 51970 adapter For use with Bandit&amp; : S100 air tool with S180 Jr. head, C-001 hand tool with J001 Jr. adapter, S350 air tool with S260 Jr. head, T-240 for<br>Features: pre-formed<br>Construction: Buckle: 302 Series Stainless Steel<br>Installation: Can be center punched or rolled over<br></p>
Supplier: Dixon&amp;<br>Material: Nylon<br>Color: White<br>Hose Size: 3/4"<br>Weight (lb): 0.03<br>Safety notes: Nylon should not be used with compressed gas Nylon fittings should not be used with acid-based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, iodine, nitric acid, phosphoric acid, sulfuric acid or xylene.<br></p>
Supplier: Dixon&amp;<br>Material: Nylon<br>Color: White<br>Male Thread: NPT<br>Male Thread Size: 3/4"<br>Hose Size: 5/8"<br>Weight (lb): 0.03<br>Safety notes: Nylon should not be used with compressed gas Nylon fittings should not be used with acid-based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, iodine, nitric acid, phosphoric acid, sulfuric acid or xylene.<br></p>
Supplier: Dixon&amp;<br>Style: Style DL<br>Material: Stainless Steel<br>Component Material: Plated Carbon Steel screw<br>Hose OD From: 13/16"<br>Hose OD To: 1-3/4"<br>Width: 1/2"<br>Weight (lb): 0.081<br>Applications: The integral extension of the band as a liner (no rivets or welds) protects soft surface hose (silicone and others) from damage caused by extrusion or shearing through the band slots.<br>Construction: screw design: 5/16 hex slotted hex head band saddle and housing are stainless steel plated carbon steel screw<br>Note: Clamps are sold 10 per box<br></p>
Supplier: Dixon&amp;<br>Style: Style LS<br>Material: 201 Series Stainless Steel<br>Component Material: Carbon Steel screw<br>Hose OD From: 1-32/64"<br>Hose OD To: 3-32/64"<br>Width: 1/2"<br>Torque: 50 in. lbs. Maximum<br>Weight (lb): 0.077<br>Construction: screw design: 5/16" slotted hex head Band &amp; Housing: 201 Series Stainless Steel Screw: Plated, Hardened Carbon Steel<br>Installation: Suggested installation torque 25-35 inch pounds, maximum recommended torque 50 inch pounds<br>Note: Sold in package quantities only<br>Safety notes: Torque ratings correspond to the torque rating of the screw of the clamp and are not an indication of the working pressure of any hose assembly installed with this clamp.<br></p>
Tank Filler 1/4" Barb Brass (Length 1.57") Std Valve Stem Thd