Attribute Values: Other

(4) 1/4" Dia. Holes
(4) 1/4" Dia. holes set apart 4 7/8" x 13 1/2" CTC (Bottom)
(4) 1/4" dia. holes with 2 1/4" x 6" apart center on center
(4) 1/4" Dia. Mounting Holes
(4) 1/4" Dia. mounting holes
(4) 1/4" Flat Head Screws (Not Included)
(4) 1/4" holes, set apart 3 1/4" center on center
(4) 1/4" Mounting Holes
(4) 1/4" Tapered Mounting Holes 2 3/4" x 1 1/4" COC (Each End)
(4) 1/4" W x 1/8" D holes
(4) 1/4"-20 Threaded Holes
(4) 1/8" and (3) 1/4" Mounting Holes
(4) 1/8" Countersunk Holes
(4) 1/8" Dia. holes
(4) 1/8" Dia. Holes
(4) 1/8" dia. holes
(4) 1/8" Dia. Holes Set in Each Corner
(4) 1/8" dia. holes with 17 3/4" x 19 3/4" apart center on center
(4) 1/8" Dia. mounting holes
(4) 1/8" Dia. Threaded Mounting Bolts
(4) 1/8" diameter countersunk mounting holes set apart approximately 1 1/2" and 3 7/8" center to center
(4) 1/8" diameter threaded mounting bolts set apart approximately 4 1/2" and 3" center on center
(4) 1/8" holes set apart 5 7/8" CTC (Each)
(4) 1/8" OD Holes With A 7" x 2 1/2" Pattern CTC
(4) 10 AWG
(4) 10-32 threaded mounting bolts
(4) 100 Watt A19, CFL
(4) 100W Type A-19 Max
(4) 10W GU24 Self Ballast LED Max
(4) 11/16"
(4) 12 11/16 in x 2 1/16 in, 2 1/16 in x 2 1/16 in
(4) 12 Inch and (1) 6 Inch
(4) 12 Inch, (1) 6 Inch
(4) 12 Inch, (4) 6 Inch
(4) 12" x 20" (Dry) Wells
(4) 12" x 20" Pan Size Insulated Wells
(4) 12" x 20" Sealed Wells
(4) 12, (4) 18, (4) 21
(4) 13W GU24 Self Ballast CFL Max
(4) 16 AWG 1.5 mm Crimp Sockets (P/N SA7127 01090 1532)
(4) 16 oz Bottles
(4) 18W GU24 Self Ballast CFL Max
(4) 2 1/2" Swivel Casters (2 Locking)
(4) 2 3/8" black casters
(4) 2 AWG - 600 kcmil, 800/1200 A#Standard/Approvals
(4) 2 in Twin Wheel Casters
(4) 2 in Twin Wheel Casters, Hardware
(4) 2 Swivel, 2 Rigid
(4) 2" Dia.
(4) 2", (2) 3", (2) 4", (2) 5", 11"
(4) 2.63 in H x 1.32 in W
(4) 20 AWG
(4) 21, (4) 18, (4) 12
(4) 23-1/4 in W x 16-1/8 in D x 3-15/16 in H
(4) 3 Pin DMX Female - (4) 3 Pin DMX Male
(4) 3 Pin XLR Female - (4) 3 Pin XLR Male
(4) 3" Trays and (1) 6" Tray
(4) 3" Trays and (4) 6" Trays
(4) 3-6.5 mm, (4) 5-9.2 mm, (3) 14-20 mm
(4) 3-pin male Deutsch
(4) 3.5 in Heavy Duty Casters, (4) Recessed Handles, Hinged Lid, Padlock Secure Latch, Recessed Butterfly Twist Latch
(4) 3/16" Dia.
(4) 3/16" Dia. countersunk mounting holes
(4) 3/16" Dia. Holes
(4) 3/16" dia. holes on the square base
(4) 3/16" Dia. holes set apart 12" x 7 1/2"
(4) 3/16" Dia. holes set apart 9 3/8"
(4) 3/16" Dia. holes set to each corner (Kill Switch Panel)
(4) 3/16" Dia. Mounting Holes
(4) 3/16" Dia. mounting holes
(4) 3/16" Dia. mounting holes approx. 4 1/2" apart CTC
(4) 3/16" Dia., (2) 3/8" Dia., and (2) 3/16" Dia. x 5/16 - 18 threaded blind tap holes
(4) 3/16" holes set apart 5 1/8" CTC
(4) 3/4 "
(4) 3/4 (Side), (8) 1/2
(4) 3/4 x 4 (not included)
(4) 3/8 x 3 (not included)
(4) 3/8" counter sunk mounting holes set apart 3 3/4" center on center
(4) 3/8" Dia.
(4) 3/8" Dia. Bolts Set Apart 5" x 1 3/4" Center to Center
(4) 3/8" Dia. Holes
(4) 32 oz Bottles
(4) 32 Watt T8 Fluorescent
(4) 36, (4) 21, (4) 18, (1) 12
(4) 4 ft Light Engine, (4) Driver
(4) 4 in Asphalt Anchor Bolts
(4) 4 oz Bottles
(4) 4 x 2
(4) 4-20 mA Isolated Outputs
(4) 40W Vintage bulbs are included
(4) 40W Vintage E12 A-15 Max
(4) 45 15/16" x 15 27/32"
(4) 48 in T8 Bulbs
(4) 4x2
(4) 5 3/8 in, (6) 3 7/8 in
(4) 5 in Casters (2 Locking)
(4) 5 x 2
(4) 5" Dia Heavy Duty Swivel Platform (2) Locking
(4) 5-3/8 in, (6) 3-7/8 in
(4) 5-spade male / (1) 3-spade male