Attribute Values: 0-9

0.18, 0.20, 0.22, 0.27

0.18/0.11A@110/220 VAC ; 0.084/0.043A@110/220 VDC

0.18/0.22/0.51 A

0.180 Deg/lb-in

0.180 Deg/lb-in (1.59 Deg/Nm)

0.180 Deg/lb-in, 1.59 Deg/Nm

0.180 in (4.57 mm)

0.180 in [Min], 0.600 in [Max]

0.180 in H2O (44.8 Pa)

0.180 in H2O (45.0 Pa)

0.180" (4.572mm)

0.180" (4.57mm)

0.180" Dia x 0.197" L (4.57mm x 5.00mm)

0.180" Dia x 0.250" L (4.57mm x 6.35mm)

0.180" Dia x 0.345" L (4.57mm x 8.76mm)

0.180" Dia x 0.385" L (4.57mm x 9.78mm)

0.180" Dia x 0.420" L (4.57mm x 10.67mm)

0.180" Dia x 0.500" L (4.57mm x 12.70mm)

0.180" Dia x 0.562" L (4.57mm x 14.27mm)

0.180" L x 0.050" W (4.57mm x 1.27mm)

0.180" L x 0.080" W (4.57mm x 2.03mm)

0.180" L x 0.125" W (4.57mm x 3.17mm)

0.180" L x 0.125" W (4.57mm x 3.18mm)

0.180" L x 0.125" W (4.60mm x 3.20mm)

0.180" L x 0.126" W (4.57mm x 3.20mm)

0.180" L x 0.167" W (4.57mm x 4.24mm)

0.180" L x 0.250" W (4.57mm x 6.35mm)

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.0460" Tooth Width 0.040" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #27-56 - Carbide UN Thread Right Hand, AlTiN Coated

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.180" Min Bore DIA x 1.000" (1) Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.180" Min Bore DIA x 1.100" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.180' (54.86mm, 2.16")

0.180" (4.57mm)

0.180"" (4.572mm)

0.180"" (4.57mm)

0.180"" Dia x 0.385"" L (4.57mm x 9.78mm)

0.180"" Dia x 0.562"" L (4.57mm x 14.27mm)

0.180"" L x 0.050"" W (4.57mm x 1.27mm)

0.180"" L x 0.080"" W (4.57mm x 2.03mm)

0.180"" L x 0.125"" W (4.60mm x 3.20mm)

0.180"" L x 0.126"" W (4.57mm x 3.20mm)

0.180"" L x 0.250"" W (4.57mm x 6.35mm)

0.1800" Min Bore DIA x 0.750" (3/4) Max Bore Depth x 0.0460" Tooth Width x 0.0400" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #24-56 - Carbide UN Thread Left Hand, AlTiN Coated

0.18008999999999997

0.1801 in to 0.1850 in

0.1801 in to 0.2810 in

0.1801" to 0.2810"

0.18031999999999998