Attribute Values: 0-9

0.06 in Hg
0.06 in WG
0.06 in.
0.06 in. (0.1524 cm)
0.06 Inch
0.06 Inch Inner Diameter x 5/32 Inch Outer Diameter x 15 ft Length
0.06 kg
0.06 kilogram
0.06 kVA
0.06 L x 0.03 W x 0.02 H ; 1.52 L x 0.75 W x 0.5 H in ; mm
0.06 lb
0.06 LB
0.06 lb (27.22 g)
0.06 lb (27.49 g)
0.06 lb (28.35 g)
0.06 lb.
0.06 lbs
0.06 lbs per EA
0.06 lbs per PK
0.06 lbs per PR
0.06 lbs.
0.06 lbs. (0 kg)
0.06 mA
0.06 MHz
0.06 mm
0.06 mm to 0.25 mm (0.0025 in to 0.01 in)
0.06 N
0.06 N/mm
0.06 ohm
0.06 Ohms
0.06 Output Power (W): 1.5 Minimum Isolation Voltage: 500VAC Input/Output Type: DC/DC Switching Regulator: No Load Regulation: 600mV Line Regulation: 80mV Efficiency (%): 79(Typ) On/Off Logic: Negative Minimum Operating Temperature (°C): -40 Maximum Operating Temperature (°C): 85 Product Weight (g): 3.2 Output Type: Fixed Supplier Package: PDIP Pin Count: 7 Standard Package Name: DIP Mounting: Through Hole Package Height: 8.51 Package Length: 16.51 Package Width: 16.61 PCB changed: 7 Lead Shape: Through Hole']
0.06 oz
0.06 oz (1.71 g)
0.06 oz-in130
0.06 Pounds
0.06 pounds
0.06 to 0.7
0.06 uA
0.06 W
0.06 x 0.32 x 0.45 inches
0.06 x 0.51 x 0.91 inches
0.06 ~ 1mm?
0.06"
0.06" (1.52mm)
0.06" (1.5mm)
0.06" (1.6mm)
0.06" (2 mm)
0.06" 12 to 24VDC 200mA NO/NC/NPN Output Stainless Steel Inductive Proximity Sensor
0.06" 12 to 24VDC 200mA NO/NC/PNP Output Stainless Steel Inductive Proximity Sensor
0.06" 12 to 24VDC 200mA NO/PNP Output Stainless Steel Inductive Proximity Sensor
0.06" in
0.06" L x 0.03" W x 0.02" H (1.6mm x 0.8mm x 0.6mm)
0.06" Thick Steel
0.06%
0.06% %
0.06% Carbon (C), 0.41% Silicon (Si), 1.1% Manganese (Mn), 0.012% Phosphorus (P), 0.011% Sulphur (S)
0.06% Carbon (C), 0.8% Manganese (Mn), 0.5% Silicon (Si), 0.011% Phosphorus (P), 0.008% Sulfur (S), 1.3% Chromium (Cr), 0.57% Molybdenum (Mo),
0.06"
0.06°C / 0.11°F
0.06"" (1.52mm)
0.06, 0.45
0.06-0.06 kW 400/415 V AC 50/60 Hz
0.06-0.15% Carbon (C), 1.4-1.85% Manganese (Mn), 0.8-1.15% Silicon (Si), 0.025% Phosphorus (P), 0.035% Sulphur (S), 0.15% Nickel (Ni), 0.15% Chromium (Cr), 0.15% Molybdenum (Mo), 0.03% Vanadium (V), 0.5% Copper (Cu)
0.060
0.060 Deg/lb-in
0.060 Deg/lb-in (0.53 Deg/Nm)
0.060 Deg/lb-in, 0.53 Deg/Nm
0.060 in
0.060 in (1.50 mm)
0.060 in H2O (14.9 Pa)
0.060 in.
0.060 LB
0.060 lb
0.060 Pound
0.060"
0.060" (1.52 mm)
0.060" (1.524mm)
0.060" (1.52mm)
0.060" (1.52mm) Dia
0.060" (1.52mm) per section
0.060" (1.5mm)
0.060" L x 0.030" W (1.52mm x 0.76mm)
0.060" L x 0.120" W (1.50mm x 3.05mm)
0.060" Min Bore DIA x 0.150" Max Bore Depth 0.0700" Tooth Width 0.015" (1/64) Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated
0.060" Min Bore DIA x 0.200" Max Bore Depth 0.0700" Tooth Width 0.015" (1/64) Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated
0.060" Min Bore DIA x 0.250" (1/4) Max Bore Depth 0.0240" Tooth Width 0.020" Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length x 0.0010" Radius #48-64 - Carbide UN Thread Right Hand, AlTiN Coated
0.060" Min Bore DIA x 0.300" Max Bore Depth 0.0700" Tooth Width 0.015" (1/64) Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length x 0.0030" Radius - Carbide Boring Standard Left Hand, AlTiN Coated
0.060" ~ 0.100" (1.52mm ~ 2.54mm)
0.060" ~ 0.126" (1.52mm ~ 3.20mm)
0.060" ~ 0.130" (1.52mm ~ 3.30mm)
0.060" ~ 0.135" (1.52mm ~ 3.43mm)
0.060"" (1.52mm)
0.060"" L x 0.030"" W (1.52mm x 0.76mm)
0.060"" ~ 0.100"" (1.52mm ~ 2.54mm)
0.0600
0.0600 In
0.0600 in
0.0600"
0.0600" (1.524mm)
0.0600" (60.0 mils, 1.524mm)