Attribute Values: 0-9

0.04 mil
0.04 mm
0.04 ohm
0.04 Ohms
0.04 oz
0.04 oz (1.14 g)
0.04 oz.
0.04 pA
0.04 pounds
0.04 Pounds
0.04 sec - 3 hr#Pulse Duration
0.04 uh
0.04 W
0.04 ~ 0.09mm?
0.04"
0.04" (0.89mm)
0.04" (1.02mm)
0.04" 5 to 24VDC 100mA NC/PNP Output Metal Inductive Proximity Sensor
0.04" 5 to 24VDC 100mA NO/NPN Output Metal Inductive Proximity Sensor
0.04" in
0.04%
0.04% (w/v)
0.04% (w/v) Thymol Blue Chemical Indicators Solution, 1 L, Ricca R8421000-1A
0.04% (w/v) Thymol Blue Chemical Indicators Solution, 1 L, Ricca R8421000-1A New Laboratory Setup Savings - up to 40%, Magnetic Stirrer, Vortex Mixer, Sample Prep, Centrifuge
0.04% Carbon (C), 18.0 - 21.0% Chromium (Cr), 9.0 - 11.0% Nickel (Ni), 0.5 - 2.5% Manganese (Mn), 1.0% Silicon (Si), 0.04% Phosphorus (P), 0.75% Copper (Cu), 0.75% Molybdenum (Mo), 0.03% Sulfur (S)
0.04% full scale/°F
0.04"
0.04° C
0.040
0.040 EVA Tray Material, Bag of 12
0.040 in
0.040 in (1.02 mm)
0.040 in [Min], 3/8 in [Max]
0.040 in to 0.200 in
0.040 in, 0.98 mm
0.040 in.
0.040 in. x 1/2 in. x 100 ft - INERTEX UHF Gasket Tape - Inertech
0.040 in. x 3/4 in. x 50 ft - INERTEX UHF Gasket Tape - Inertech
0.040 Pound
0.040"
0.040" (1.00mm)
0.040" (1.016mm)
0.040" (1.01mm)
0.040" (1.02mm)
0.040" (1.02mm) Dia
0.040" (1.0mm)
0.040" L x 0.020" W (1.00mm x 0.50mm)
0.040" L x 0.020" W (1.01mm x 0.50mm)
0.040" L x 0.020" W (1.02mm x 0.51mm)
0.040" L x 0.020" W x 0.013" H (1.00mm x 0.50mm x 0.32mm)
0.040" L x 0.020" W x 0.016" H (1.00mm x 0.50mm x 0.40mm)
0.040" L x 0.020" W x 0.019" H (1.00mm x 0.50mm x 0.48mm)
0.040" L x 0.022" W (1.02mm x 0.55mm)
0.040" L x 0.025" W (1.02mm x 0.64mm)
0.040" Orifice
0.040" ~ 0.050" (1.02mm ~ 1.27mm)
0.040" X 1/2" X 100' - UHF GASKET TAPE
0.040" X 3/4" X 50' - UHF GASKET TAPE
0.040" (1.02mm)
0.040" SOL BC PTFE AL TAPE+TNC, FOIL SHD FRPVC JKT RED, 50 OHM CMP/FT6
0.040" SOL BCCAI TNC, BRD+FOIL SHD FRPVC JKT, 50 OHM CMP, 1000FT
0.040"" (1.016mm)
0.040"" (1.02mm)
0.040"" L x 0.020"" W (1.00mm x 0.50mm)
0.040"" L x 0.020"" W (1.02mm x 0.51mm)
0.040"" L x 0.020"" W x 0.013"" H (1.00mm x 0.50mm x 0.32mm)
0.0400
0.0400 in
0.0400 in to 0.2280 in
0.0400"
0.0400" (1.016mm)
0.0400" (40.0 mils, 1.016mm)
0.0400" Cutter DIA x 0.060" Length of Cut Carbide Ball End Mill for Steels and High Temperature Alloys, 3 Flutes
0.0400"
0.0400" (40.0 mils, 1.016mm)
0.0400"" (1.016mm)
0.0400-733
0.04000
0.040000
0.040005
0.04001
0.04002
0.04003
0.04004
0.04005
0.04006
0.04007
0.04008
0.04009
0.040092
0.0400\
0.0401
0.0401 in
0.0401 lb-in
0.0401 lb-in<sup>2</sup>, 11.885 x10<sup>-6</sup> kg-m<sup>2</sup>
0.04010
0.040100
0.04011
0.04013
0.04014