dataSource: amazonScraper

Products with this attribute (89737 total)

HXB series 25V 100uF 6.3x7.7mm 105'C Polymer Hybrid Aluminum Electrolytic Cap ***** For more information refer to the specification sheet located in the 'Downloads' section below the image *****

HydraPump Smart - Water Pump with HydraSense technology for automatic operation - Amazon.com

HydraulcFiltration.com is a privately held filtration manufacturer and distributor. All other filter manufacture company names are shown for reference only. All trademarks, registered or unregistered, are trademarks of their respective owners. Reference is made to these companies solely to identify the compatibility of HydraulicFiltration.com filters with the OEM product; the OEM has not sponsored or endorsed our filters and HydraulicFiltration.com does not claim to make products for the OEM or supply original OEM products.

Hydraulic 4-Bolt Flange Pipe Socket Weld. Flange adapters for hydraulic systems make installation of components easier, especially in applications with limited space. Features: Standard pressure. Flanges are constructed with an O-ring seal to eliminate leakage. Includes bolt kit with Buna O-ring.

Hydraulic Coupler Body Coupler Interchange Type H Connection Type UNF Coupler Thread Size 1-1/16 In.-12 Coupler Body Size 3/4 In. Coupler Flow Rate 25.0 gpm Max Pressure 3500 psi Coupler Body Material Steel Sleeve Material Steel Coupler Finish Zinc Plated Operating Temp Range -20 Degrees to 375 Degrees F Bearing Material 440 Stainless Steel Length 2-59/64 In. Coupler Connection Type UNF Seal Material Viton Shut Off Yes Valve Design Poppet Locking Mechanism Ball

Hydraulic Coupler Body, Coupler Interchange Type PH, Connection Type FNPT, Coupler Thread Size 1-1/2 In.-11-1/2, Coupler Body Size 1-1/2 In., Coupler Flow Rate 110.0 gpm, Max. Pressure 4000 psi, Coupler Body Material Steel, Sleeve Material Steel, Coupler Finish Zinc Plated, Seal Type Viton, Operating Temp. Range -20 Degrees to 375 Degrees F, Bearing Material 440 Stainless Steel, Coupler Connection Type FNPT, Seal Material Viton, Shut Off No, Valve Design Poppet, Locking Mechanism Ball

Hydraulic Coupler Nipple Coupler Interchange Type 71 Connection Type NPT Coupler Thread Size 1-1/4 In.-11-1/2 Coupler Body Size 1 In. Coupler Flow Rate 60.0 gpm Max Pressure 7500 psi Coupler Body Material Steel Sleeve Material Steel Coupler Finish Zinc Plated Operating Temp Range -40 Degrees to 200 Degrees F Length 3-15/64 In. Coupler Connection Type NPT Seal Material Buna Shut Off Yes Valve Design Flush Face Locking Mechanism Ball

Hydraulic Coupler Nipple Coupler Interchange Type 71 Connection Type UNF Coupler Thread Size 3/4 In.-16 Coupler Body Size 3/8 In. Coupler Flow Rate 12.0 gpm Max Pressure 5000 psi Coupler Body Material 316 Stainless Steel Sleeve Material 316 Stainless Steel Coupler Finish Plain Operating Temp Range -40 Degrees to 200 Degrees F Length 2-21/64 In. Coupler Connection Type UNF Seal Material Buna Shut Off Yes Valve Design Flush Face Locking Mechanism Ball

Hydraulic Coupler Nipple Coupler Interchange Type FEM Connection Type FSAE Coupler Thread Size 7/8 In.-14 Coupler Body Size 1/2 In. Coupler Flow Rate 12.0 gpm Max Pressure 3625 psi Coupler Body Material Steel Coupler Finish Zinc Plated Operating Temp Range -40 Degrees to 250 Degrees F Bearing Material Stainless Steel Length 2-49/64 In. Coupler Connection Type FSAE Seal Material Buna Valve Design Non-Spill Locking Mechanism Ball For Use With ISO 16028 Coupler

Hydraulic Cylinder Double Acting Tie Rod Bore Dia (In.) 2-1/2 Stroke (In.) 12 Rod Dia (In.) 1-1/8 Retract (In.) 22-1/4 Port Size (NPT) 1 In. Port Size (SAE) #8 Max Pressure (PSI) 3000 Temp Range -20 Degrees to 180 Degrees F Ductile Iron Piston Material Polished Chrome Piston Rod Polyurethane Ring Material Heavy-wall Honed Steel Tubes Durable Non-metallic Wear Band Urethane U-Cup Rod Seal Steel Material High Tensile Tie Rods Pre-loaded Piston Seal Unfinished Finish

Hydraulic Element

Hydraulic Filter, Filter Design Spin-On, Height 11-17/32 In. , Length 11-17/32 In. , Width 4-23/32 In. , Outside Dia. 4-23/32 In. , Includes 1 I Gasket

Hydraulic Filter, Filter Design Spin-On, Height 18-1/2 In. , Length 18-1/2 In. , Width 3-21/32 In. , Outside Dia. 3-21/32 In. , Inside Dia. 1-3/4 In. , Includes (2) Grommets Attached

Hydraulic Filter, Filter Design Spin-On, Height 8-3/32 In. , Length 8-3/32 In. , Width 4-21/32 In. , Outside Dia. 4-21/32 In. , Includes Integral Post Seal, G498-A I Gasket

Hydraulic Flange Fitting Fitting Shape 90 Degrees Elbow Hydraulic Fitting Connection Type Crimpable Hydraulic Hose I.D. 1-1/4 In. Hydraulic Flange Size 2-1/2 In. Flange Code 62 Fitting Material Carbon Steel Length (In.) 7 Hose Dash Size 20 Finish Dura Kote(TM) Standards SAE CD62

Hydraulic Flange Fitting Fitting Shape Straight Hydraulic Fitting Connection Type Crimpable Hydraulic Hose I.D. 2 In. Hydraulic Flange Size 2 In. Flange Code 61 Fitting Material Carbon Steel Length (In.) 4.61 Hose Dash Size 32 Finish Zinc Trivalent Chromate Standards SAE J1926 SAE J514 SAE J1453 SAE J512 SAE J801

Hydraulic flaring tool kit can be used for brake lines, transmission cooling lines and fuel lines. Works with stainless steel, steel and soft metal tubing. Create precision 45 degree double, single and bubble flares in seconds. Set contains brake flare forming tool, 3/16" and 1/4" tube retaining dies, adapters, handle and a hard plastic storage/carrying case. User manual included.   This product meets the large package requirement per UPS/FedEx. The estimated shipping cost will include this fee.

Hydraulic Gear Pump Displacement (Cu. In./Rev.) 0.66 GPM @ 3600 RPM 1000 PSI 8.9 Max Continuous PSI 3000 Max Intermittent Pressure (PSI) 3500 Max RPM 3600 Min RPM 750 Mounting 2 Bolt SAE A Ports (Inlet) 1-1/16-12 Ports (Outlet) 7/8-14 Rotation Right Shaft Extension (In.) 5/8 x 1-1/4 Cover Material Aluminum Design A Housing Aluminum Dimension A (In.) 3.05 Length (In.) 5.11 Width (In.) 5.12

Hydraulic General Purpose

Hydraulic Hose Fitting Crimp Male SAE Inverted Flare Swivel Fitting Type 45 Degree Elbow Hose (In.) 1/4 SAE Flare Size (In.) 5 Thread Angle (Deg.) 45 Length (In.) 2.39 Dash Size 5 Fitting Material Carbon Steel Finish Trivalent Chromium Zinc Plating Male SAE Size (in.) 1/2-20

Hydraulic Hose Fitting Matchmate Crimp Fitting Type Crimp Hose (in.) 3/8 Male SAE Size (in.) 11/16-18 Length (in.) 2.45 Dash Size -7 Carbon Steel Zinc Trivalent Chromate Finish SAE J1926 SAE J514 SAE J1453 SAE J512 SAE J782 Standards

Hydraulic Hose Fitting Matchmate Crimp Fitting Type Crimp Hose (in.) 3/8 Male SAE Size (in.) 7/16-24 Length (in.) 2.28 Dash Size -4 Carbon Steel Zinc Trivalent Chromate Finish SAE J1926 SAE J514 SAE J1453 SAE J512 SAE J791 Standards

Hydraulic Hose Fitting PTFE Crimp Fitting Type Female JIC Fitting 90 Degrees Elbow Hose (In.) 5/8 Thread NPT NA JIC Thread (In.) 1-1/16-12 SAE Flare Size (In.) NA O-Ring Thread (In.) NA Male SAE Size (in.) NA Flange Size (In.) NA Female SAE Size (in.) NA BSPP Thread Size NA Metric Thread Size NA Thread Angle (Deg.) 37 Length (In.) 2.29 Dash Size -12 Carbon Steel Dura Kote(TM) Finish SAE J514 Standards

Hydraulic Hose Fitting, Type Crimp, Female JIC, Fitting Type 45 Degrees Elbow, Hose (In.) 1/4, JIC Thread (In.) 7/16-20, SAE Flare Size (In.) 1/4, Length (In.) 1.96, Dash Size 4, Fitting Material Steel, Finish Zinc, Standards SAE 100R2WARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Hydraulic Lift Kit Load Rating 220 lb Per Cylinder Number of Cylinders 4 Cylinder Material Steel Tube Length 7-1/2 In. Includes Hydraulic Pump 4 Adjustment Cylinders Tubes and Motor

Hydraulic Lift Kit Workbench Accessory Adjustment Range 10 In. Load Rating 1000 lb. Number of Cylinders 4 Cylinder Material Aluminum Tube Length 96 In.-96 In.-60 In.-60 In. Motor HP 1/9 Motor Hz 50/60 Mounting Type Retro Fit Screw Size 1/4 in 20 Includes System Complete Less Hardware Caster

Hydraulic Lift Kit Workbench Accessory Adjustment Range 12 In. Load Rating 1500 lb. Number of Cylinders 4 Cylinder Material Aluminum Tube Length 96 In.-96 In.-60 In.-60 In. Motor HP 1/9 Motor Hz 50/60 Mounting Type Retro Fit Screw Size 1/4 in 20 Includes System Complete Less Hardware Caster

Hydraulic Vibrator Turbine Force Sinusoidal 3500 lb Force @ 1000 psi Continuous Duty Speed @ 1000 psi 3500 VPM GPM @ 1000 PSI 2.4 Max Pressure 3000 psi Inlet Port 3/4 In.-16 SAE Outlet Port 3/4 In.-16 SAE Overall Length 12-1/4 In. Overall Width 12-1/2 In. Overall Height 10-3/4 In.

HYDRAULIC WHEEL STUD PRESS (DRUM & DISC BRAKE)

Hydro-Rain BL406-031 No Glue Needed 1" BL x 3/4" BL Tee

Hydro-Rain HRM-100-BX-CA HRM 100 1 inch Buttress Thread Cap

Hydrometers are manufactured to the exacting specifications provided by NIST, ASTM/API and IRS and are calibrated against standards traceable to NIST. A certificate is provided with each hydrometer assuring that the user receives a quality instrument. The Brix scale is used in sugar refineries, and also often encountered on wine labels where it describes the sugar content of the grape juice from which the wine was made. Each two degrees Brix of the juice leads to about 1% alcohol by volume in the wine. The Balling scale is numerically the same as the Brix.

Hydronic Circulating Pump Hydronic Circulating Pump HP 1/2 Voltage - Pumps 208/230/460VAC Phase - Pumps 3 Inlet/Outlet Size 1/2 In. Shut-Off 28 ft. Housing Material - Pumps Bronze Fitted Max GPM @ Head 77 gpm @ 12 ft. Height 15-5/8 In. Length 11 In. Width 7-1/2 In. Amps 2.0 to 2.1/1.0 Impeller Material ASTM Shaft Material Stainless Steel Manufacturers Warranty Length 1 yr.

Hydronic Unit Heater, Heater Type Water Only, Fan Guard Type OSHA, Output @ 200 F Water 18,400 BtuH, Air Flow 500 cfm, Motor HP 16W, Amps 0.8, Inlet/Outlet NPT 3/8", Height 16", Width 18", Depth 7-3/4", Air Flow Direction Horizontal, Coil Type Serpentine, Voltage 115, Hz 60, Phase 1, Max. Operating PSI 75, Max. Operating Temp. 320 Degrees F, Motor Enclosure Totally Enclosed, Mounting Height 8 ft., Standards ETL Certified.WARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

HyFlex 11-801 Multipurpose Gloves - Lightweight, Grip and Comfort, Size Small (pack of 12): Amazon.com: Tools & Home Improvement

Hygrade 1434 Carb Kit

I Can Be a Gymnast (Barbie) (Step into... by Depken, Kristen L.

I Love You Rituals [Bailey, Becky A] on Amazon.com. *FREE* shipping on qualifying offers. I Love You Rituals

I O Module Relays Output Module 115VAC 4000VAC DIN Rail

I.C. pre-gloving, fragrance-free lotion helps relieve dermatitis symptoms. -Greaseless -Contains no Silicones, Lanolins, Mineral Oil, or Glycerins -Anti-static and non-contaminating -Fragrance- and dye-free -Can be used before gloving Fragrance- and dye-free I.C Because dry skin can reduce the conductivity of grounding wrist straps, and this lotion moisturizes skin without introducing electrically resistive ingredients, it can help to meet American National Standards Institute/Electrostatic Discharge Association (ANSI/ESDA) S20.20 requirements. The lotion is available in a variety of packaging options. It also contains botanical extracts of blueberry, cranberry, pomegranate, strawberry, raspberry, green coffee bean, green tea, grape seed, and acai berry. Cleanroom Lotion meets Class 1 cleanroom requirements and is static dissipative for use in electrostatic protected areas. It is compatible with latex and nitrile gloves to reduce the risk of glove degradation, and with CHG (chlorhexidine gluconate), an anti-pathogen commonly used in hospitals to reduce the risk of deactivating interference. It does not contain glycerin, mineral oil, silicones, or lanolin, any of which may contaminate integrated circuit (I.C.) boards during manufacturing or handling. This lotion moisturizes dry skin with a combination of ingredients, including the humectant propylene glycol and vitamins A, D, and E, along with succulents such as aloe vera, jojoba, and blue agave. It is made with deionized water, absorbs immediately into the skin for a non-greasy feeling, and is fragrance- and dye-free to reduce the chance of allergic reactions.

I/O Cable, Socket one end

I/O Modules*; Control Voltage:

I0634-1MG

IBLAST-RKIT

IBVNDP488GT