dataSource: amazonScraper

Products with this attribute (89737 total)

Carbide Bur, Shape Cone, Cutter Dia. 3/4 In., Shank Size 1/4 In., Overall Length 2-1/2 In., Length of Cut 3/8 In., Cutting Edge Type Single Cut, Angle 90 Degree, Shank Material Steel, Trade Number SK-7, Application Acute Angle Machining, Chamfering and Countersinking

Carbide Bur, Shape Cylinder With End Cut, Cutter Dia. 7/16 In., Shank Size 1/4 In., Overall Length 2-3/16 In., Length of Cut 1 In., Cutting Edge Type Double Cut, Shank Material Steel, Trade Number SB-4, Application Peripheral and Face Milling

Carbide Bur, Shape Cylinder, Cutter Dia. 7/16 In., Shank Size 1/4 In., Overall Length 2-3/16 In., Length of Cut 1 In., Cutting Edge Type Double Cut, Shank Material Steel, Trade Number SA-4, Application Deburring

Carbide Drill Mill Grade C2 Micro Grain List Number 208 Multipurpose Tool End Style 90 Degrees End Single End Dimension Type Fractional Inch Diameter 5/8 In. Shank Dia 5/8 In. Length of Cut 1-1/4 In. Overall Length 3-1/2 In. Number of Flutes 2 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Finish Uncoated

Carbide end mill comes with C2 micro grain grade, 204 list number, general purpose type, corner radius end style, single end, fractional inch dimension type, 3/16" diameter, 3/16" shank diameter.

Carbide end mill comes with C2 micro grain grade, 204 list number, general purpose type, square end style, single end, fractional inch dimension type, 29/64" diameter, 1/2" shank diameter.

Carbide end mill comes with C2 micro grain grade, 204 list number, general purpose type, square end style, single end, metric dimension type, 3.0 mm diameter, 3.0 mm shank diameter.

Carbide end mill comes with C2 micro grain grade, 206 list number, general purpose type, corner radius end style, single end, fractional inch dimension type, diameter 3/16", shank diameter 3/16".

Carbide end mill comes with C2 micro grain grade, 223 list number, general purpose type, ball nose end style, single end, metric dimension type, 3.0 mm diameter, 3.0 mm shank diameter.

Carbide end mill comes with C2 micro grain grade, 224 list number, general purpose type, ball nose end style, single end, fractional inch dimension type, diameter 3/4", shank diameter 3/4".

Carbide end mill comes with C2 micro grain grade, 229 list number, general purpose type, ball nose end style, single end, fractional inch dimension type, 1" diameter, 1" shank diameter.

Carbide End Mill Grade C2 Micro Grain List Number 204 General Purpose End Style Corner Radius End Single End Dimension Type Fractional Inch Diameter 1 In. Shank Dia 1 In. Length of Cut 1-1/2 In. Overall Length 4 In. Number of Flutes 2 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Corner Radius .060 In. Finish Uncoated

Carbide End Mill Grade C2 Micro Grain List Number 204 General Purpose End Style Corner Radius End Single End Dimension Type Fractional Inch Diameter 5/8 In. Shank Dia 5/8 In. Length of Cut 1-1/4 In. Overall Length 3-1/2 In. Number of Flutes 2 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Corner Radius .030 In. Finish TiAlN

Carbide End Mill Grade C2 Micro Grain List Number 206 General Purpose End Style Corner Radius End Single End Dimension Type Fractional Inch Diameter 1 In. Shank Dia 1 In. Length of Cut 1-1/2 In. Overall Length 4 In. Number of Flutes 4 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Corner Radius .045 In. Finish TiAlN

Carbide End Mill Grade C2 Micro Grain List Number 206 General Purpose End Style Corner Radius End Single End Dimension Type Fractional Inch Diameter 1/4 In. Shank Dia 1/4 In. Length of Cut 3/4 In. Overall Length 2-1/2 In. Number of Flutes 4 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Corner Radius .010 In. Finish TiAlN

Carbide End Mill Grade C2 Micro Grain List Number 221 General Purpose End Style Ballnose End Single End Dimension Type Fractional Inch Diameter 5/16 In. Shank Dia 5/16 In. Length of Cut 13/16 In. Overall Length 2-1/2 In. Number of Flutes 2 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Finish TiAlN

Carbide End Mill Grade C2 Micro Grain List Number 223 General Purpose End Style Ballnose End Single Dimension Type Metric Diameter 4.5mm Shank Dia 5.0mm Length of Cut 16.0mm Overall Length 51.0mm Number of Flutes 4 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Finish TiAlN

Carbide End Mill Grade C2 Micro Grain List Number 240 General Purpose End Style Ballnose End Double Dimension Type Fractional Inch Diameter 1/4 In. Shank Dia 1/4 In. Length of Cut 1/2 In. Overall Length 2-1/2 In. Number of Flutes 2 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Finish TiAlN

Carbide End Mill Grade C2 Micro Grain List Number 240 General Purpose End Style Ballnose End Double Dimension Type Fractional Inch Diameter 3/32 In. Shank Dia 1/8 In. Length of Cut 3/16 In. Overall Length 1-1/2 In. Number of Flutes 2 Center Cutting Type Cutting Direction Right Hand Helix Angle 30 Degrees Finish TiAlN

Carbide End Mill Grade C2 Micro Grain List Number GM34RXL5 General Purpose End Style Corner Radius End Single Dimension Type Fractional Inch Diameter 3/4 In. Length of Cut 3 In. Overall Length 6 In. Number of Flutes 5 Center Cutting Type Cutting Direction Right Hand Helix Angle Variable Helix and Staggered Flute Finish GMX-35 Application Milling

Carbide End Mill Grade General Purpose List Number CEM-EM-5 High Helix End Style Square End Single Dimension Type Fractional Inch Diameter 1/4 In. Shank Dia 1/4 In. Length of Cut 3/8 In. Overall Length 2 In. Number of Flutes 5 Center Cutting Type Cutting Direction Right Hand Helix Angle 47 Degrees Finish Bright Application For Hardened Steel and Stainless Steel

Carbide End Mill Grade High Performance List Number CEM-V2-5R Variable Index End Style Corner Radius End Single Dimension Type Fractional Inch Diameter 5/8 In. Shank Dia 5/8 In. Length of Cut 2-1/4 In. Overall Length 5 In. Number of Flutes 5 Center Cutting Type Cutting Direction Right Hand Helix Angle 38 Degrees Corner Radius 0.125 In. Finish TiAlN Application Milling

Carbide end mill has features that include grade- C2 micro grain, list number- 245 . Type- general purpose, end style- Ball nose End Single End Dimension type fractional inch diameter- 3/16, shank diameter- 3/8, length of cut- 1/2, overall length- 3, number of flutes- 4, cutting type- center cutting, direction- right hand, helix angle- 30 degrees and finish- TiAlN. Application - Used for general purpose milling in the metal working for slotting, production milling, Pocketing, Plunging and finishing applications in cast iron, non-ferrous metals, plastics and abrasive materials. Flute geometry allows for maximum chip removal and roughing capabilities, standard, flute length- for general all purpose milling.

Carbide end mill is of grade - C2 micro grain and list number - 203. It is of type - general purpose, End Style: Square, End: Single, dimension type - fractional inch, diameter - 1/32", shank diameter - 1/8".

Carbide end mill is of grade- C2 micro grain and list number- 204, type general purpose, end style- square, End is single, dimension type- fractional Inch, diameter- 1/16", shank diameter 1/8".

Carbide End Mill List Number 4001JJ Ball Nose End Mill Style Dimension Type Metric Milling Dia 20.00mm Number of Flutes 2 Length of Cut 38.00mm Center Cutting Type Overall Length 150.00mm Finish AlTiN Straight Shank Type Shank Dia 20.00mm Single End Cutting Direction Right Hand Helix Angle 30 Degrees Neck Length 38.00mm End Mill Application Roughing/Finishing

Carbide End Mill List Number 4K02 Square End Mill Style Dimension Type Decimal Inch Milling Dia 0.3125 In. Number of Flutes 2 Length of Cut 0.4375 In. Center Cutting Type Overall Length 2.0000 In. Finish Uncoated Straight Shank Type Shank Dia 0.3125 In. Single End Cutting Direction Right Hand Helix Angle 45 Degrees Neck Length 0.4375 In. End Mill Application Finishing

Carbide End Mill List Number 4K03 Square End Mill Style Dimension Type Decimal Inch Milling Dia 1.0000 In. Number of Flutes 3 Length of Cut 1.5000 In. Center Cutting Type Overall Length 4.0000 In. Finish Uncoated Straight Shank Type Shank Dia 1.0000 In. Single End Cutting Direction Right Hand Helix Angle 37 Degrees Neck Length 1.5000 In. End Mill Application Finishing

Carbide End Mill List Number 4V05 Corner Radius End Mill Style Dimension Type Decimal Inch Milling Dia 0.1250 In. Number of Flutes 4 Length of Cut 0.5000 In. Center Cutting Type Overall Length 2.0000 In. Finish AlTiN Straight Shank Type Shank Dia 0.1250 In. Single End Cutting Direction Right Hand Helix Angle 38 Degrees Corner Radius 0.015 In. Neck Length 0.5000 In. End Mill Application Finishing

Carbide End Mill List Number 5718 Corner Radius End Mill Style Dimension Type Decimal Inch Milling Dia 0.7500 In. Number of Flutes 5 Length of Cut 3.0000 In. Non-Center Cutting Type Overall Length 6.0000 In. Finish AlTiN Straight Shank Type Shank Dia 0.7500 In. Single End Cutting Direction Right Hand Helix Angle 43 Degrees Corner Radius 0.120 In. Neck Length 3.0000 In. End Mill Application Finishing

Carbide End Mill List Number 5V0C Corner Radius End Mill Style Dimension Type Decimal Inch Milling Dia 0.3750 In. Number of Flutes 5 Length of Cut 0.8750 In. Center Cutting Type Overall Length 2.5000 In. Finish AlTiN Straight Shank Type Shank Dia 0.3750 In. Single End Cutting Direction Right Hand Helix Angle 38 Degrees Corner Radius 0.060 In. Neck Length 0.8750 In. End Mill Application Finishing

Carbide End Mill List Number D002/D012 Square End Mill Style Dimension Type Metric Milling Dia 8.70mm Number of Flutes 2 Length of Cut 16.00mm Center Cutting Type Overall Length 72.00mm Finish TiAlN Weldon Shank Type Shank Dia 10.00mm Single End Cutting Direction Right Hand Helix Angle 30 Degrees Neck Length 16.00mm End Mill Application Finishing

Carbide End Mill List Number TM7FN7 Torus End Mill Style Dimension Type Decimal Inch Milling Dia 0.3750 In. Number of Flutes 6 Length of Cut 0.0123 In. Center Cutting Type Overall Length 3.5000 In. Finish AlTiN Straight Shank Type Shank Dia 0.3750 In. Single End Cutting Direction Right Hand Helix Angle 20 Degrees Corner Radius 0.023 In. Neck Length 1.2500 In. End Mill Application Finishing

Carbide end mill, grade - c2 micro grain, list number - 206, type general purpose, end style - corner radius, end - single end, dimension type - fractional inch, diameter - 5/16", shank diameter - 5/16".

Carbide end mill, grade - c2 micro grain, list number - 223, type general purpose, end style - ball nose, end - single, dimension type - metric, diameter - 4.5 mm, shank diameter - 5.0 mm.

Carbide End Mill, Grade C2 Micro Grain, List Number 206, General Purpose, End Style Square, End Single End, Dimension Type Metric, Diameter 9.0mm, Shank Dia. 10.0mm, Length of Cut 22.0mm, Overall Length 63.0mm, Number of Flutes 4, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degrees , Finish TiAlN

Carbide End Mill, Grade C2 Micro Grain, List Number 224, General Purpose, End Style Ballnose, End Single End, Dimension Type Fractional Inch, Diameter 1/2 In., Shank Dia. 1/2 In., Length of Cut 1-1/2 In., Overall Length 4 In., Number of Flutes 2, Center Cutting Type, Cutting Direction Right Hand, Helix Angle 30 Degrees , Finish TiAlN

Carbide End Mill, List Number 6608/6618, Corner Chamfer End Mill Style, Dimension Type Metric, Milling Dia. 14.00mm, Number of Flutes 4, Length of Cut 26.00mm, Center Cutting Type, Overall Length 83.00mm, Finish Uncoated, Weldon Shank Type, Shank Dia. 12.00mm, Single End, Coarse Pitch, Cutting Direction Right Hand, Helix Angle 30 Degrees , End Mill Application Roughing

Carbide inserts and Allen wrench included. Multi-purpose Indexable tools Complete with fitted case.

Carbide, end mill, grade- c2 micro grain, list number- 221, type general purpose, end style- ball nose, end- single end, dimension type- fractional inch, diameter- 11/64", shank Diameter- 3/16".

Carbon Monoxide Alarm Detector - with Digital LCD Display and Voice Warning Battery powered - Amazon.com

Carbon Monoxide Analyzer Carbon Monoxide Measurement Range (PPM) 0 - 4000 ppm Carbon Dioxide Concentration 0 to 0.1 Percent Temp Range +5 Degrees to 40 Degrees C Relative Humidity Range 30 Percent to 70 Percent Dew Point Range 68 Degrees to 212 Degrees F Oxygen Concentration 0 to 21 Percent Humidity Accuracy +/-3 Percent Accuracy +/-0.3 Percent of Reading or +/-5 Degrees F Resolution 0.1 Percent Display Backlit LED Auto Power Off No Low Battery Indicator Yes Sensor Life 4 yr.

Carbon steel 90 Degree elbow fitting.

Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Select the right filters to fit your Labconco product.

CARCP200N

Cardinal 14950 Dual Pocket Snap Envelope, Letter, 3-Hole Punched, 5/PK, AST

Cardinal 18842 Premier Easy Open Locking Round Ring Binder, 3-Inch Cap, 11 x 8 1/2, Black

Cardinal Bndr, Sprlifeproeocvd, 1, Wh 54652-1 Each

Cardinal INDEX, QUICKSTEP, 8TAB, WE

Cardinal OneStep Index System, 23 x Tab Printed A - Z - 1 Set - Clear Divider

CARDINAL.19020

Cardinalamp;reg; - EasyOpen FreeStand Binder with Locking Slant-D Rings, 3amp;quot; Capacity, White - Sold As 1 Each - PVC-Free Poly Material Won't Stick to Cover Inserts or Materials stored Inside.

Carefully made by Ruland in Marlborough, MA, curved jaw couplings are comprised of two hubs pressed fit with an elastomer "spider" with the same OD. Curved jaw couplings are zero-backlash by design and are well-suited to servo applications where accuracy of torque transmission is required. Hub material is type 2024 T351 high strength aluminum with M4 forged alloy steel set screws. Maximum is 8,000 RPM. RoHS and Reach compliant. Also called a curved jaw coupling, flexible jaw coupling, shaft coupling, or coupler.

Carefully made by Ruland in Marlborough, MA, curved jaw couplings are comprised of two hubs pressed fit with an elastomer "spider" with the same OD. Curved jaw couplings are zero-backlash by design and are well-suited to servo applications where accuracy of torque transmission is required. Hub material is type 2024 T351 high strength aluminum with material class 12.9 M3 forged alloy steel socket head cap screws. Maximum is 8,000 RPM. RoHS and Reach compliant. Also called a curved jaw coupling, flexible jaw coupling, shaft coupling, or coupler.

Carefully made by Ruland in Marlborough, MA, double-wide shaft collars can be used as short rigid couplings while handling high axial loads. These shaft collars are single point faced to ensure bore to face perpendicularity for proper fit and alignment of components. Proprietary processes ensure a good fit, excellent holding power, and a fine burr free finish. Material is corrosion resistant 18-8 303 stainless steel and forged 18-8 stainless steel #4-40 socket head cap screws. RoHS and Reach compliant. Also called a set collar, sleeve coupling, rigid coupling, or 1 piece split collar.

Carefully made by Ruland in Marlborough, MA, Oldham couplings are comprised of two hubs pressed fit with either an acetal or nylon disk. Oldham couplings disengage if the disc breaks, acting as a mechanical fuse. Well-suited for handling large amounts of parallel misalignment. Hub material is type 2024 T351 high strength aluminum with a black anodized finish and M5 forged alloy steel set screws. Maximum is 4,500 RPM. RoHS and Reach compliant. Also called a universal coupling, shaft coupling, or coupler.

Carefully made by Ruland in Marlborough, MA, Oldham couplings are comprised of two hubs pressed fit with either an acetal or nylon disk. Oldham couplings disengage if the disc breaks, acting as a mechanical fuse. Well-suited for handling large amounts of parallel misalignment. Hub material is type 2024 T351 high strength aluminum with a black anodized finish and material class 12.9 M2.5 forged alloy steel socket head cap screws. Maximum is 4,500 RPM. RoHS and Reach compliant. Also called a universal coupling, shaft coupling, or coupler.

Carefully made by Ruland in Marlborough, MA, quick-clamp shaft collars require no tools as they have an integrated lever for easy adjustments. These shaft collars are single point faced to ensure bore to face perpendicularity for proper fit and alignment of components. Proprietary processes ensure a good fit, excellent holding power, and a fine burr free finish. Material is 6061-T6 aluminum with a black anodized finish and forged 18-8 stainless steel M3 socket head cap screws The hardware is Microsphere Coating for Fine Tension Adjustment. RoHS and Reach compliant. Also called a quick clamping shaft collar or set collar.

Carefully made by Ruland in Marlborough, MA, quick-clamp shaft collars require no tools as they have an integrated lever for easy adjustments. These shaft collars are single point faced to ensure bore to face perpendicularity for proper fit and alignment of components. Proprietary processes ensure a good fit, excellent holding power, and a fine burr free finish. Material is 6061-T6 aluminum with a black anodized finish and forged 18-8 stainless steel M4 socket head cap screws The hardware is Microsphere Coating for Fine Tension Adjustment. RoHS and Reach compliant. Also called a quick clamping shaft collar or set collar.

Carefully made by Ruland in Marlborough, MA, set screw shaft collars are single point faced to ensure bore to face perpendicularity for proper fit and alignment of components. Proprietary processes ensure a good fit, excellent holding power, and a fine burr free finish. Material is corrosion resistant 18-8 303 stainless steel and forged 18-8 stainless steel 1/2-13x1/2 set screws. RoHS and Reach compliant. Also called a set collar or ring collar.

Carefully made by Ruland in Marlborough, MA, these shaft collars are single point faced to ensure bore to face perpendicularity for proper fit and alignment of components. Proprietary processes ensure a good fit, excellent holding power, and a fine burr free finish. Material is 1215 lead free steel with a black oxide finish and forged alloy steel material class 12.9 1/4-28 socket head cap screws. RoHS and Reach compliant. Also called a set collar, double, or 2 piece split collar.

Carefully made by Ruland in Marlborough, MA, these shaft collars are single point faced to ensure bore to face perpendicularity for proper fit and alignment of components. Proprietary processes ensure a good fit, excellent holding power, and a fine burr free finish. Material is highly corrosion resistant 316 stainless steel and forged 316 stainless steel M3x8 socket head cap screws. RoHS and Reach compliant. Also called a set collar, double, or 2 piece split collar.

Cargo Strap, Adjustment Type Ratchet, Strap Length 27 ft., Strap Width 2 In., Working Load Limit 1600 lb., Breaking Strength 5000 lb., Body Material Polyester, Hardware Material Heavy Duty Steel, Color Yellow, Fitting Style Triangle Ring, Includes Flat Hook or Triangle Ring

Carhartt's knit hat with visor offers the warmth and the one-size-fits-all versatility of a knit pull-on plus the ability to shade your eyes from bright sun or snow. Durable and comfortable, it's made of 100 percent acrylic, stretchable rib-knit fabric, and features the Carhartt logo embroidered on the front.

Carhartt's midweight hooded zip-front sweatshirt brings considerable comfort to cool-weather worksites its 50-percent cotton 50-percent polyester fleece blend provides plenty of warmth and a full-length brass front zipper let you regulate the temperature other features include an attached hood with adjustable drawstring, front hand-warmer pockets and rib-knit cuffs and waist band to keep out the cold heather gray fiber content is 70-percent cotton / 30-percent polyester charcoal heather fiber content is 55-percent cotton / 45-percent polyester

Carhartt's short sleeve workwear pocket t-shirt is an all-purpose work shirt that is perfect in warm weather or for layering when it gets cold. It?s made of 6.75-ounce, 100% cotton jersey knit and features a rib-knit collar and a left chest pocket. it?s also been designed with side-seamed construction to minimize twisting and maximize comfort. ash fiber content is 99% cotton / 1% polyester. Heather gray fiber content is 90% cotton / 10% polyester.

CARLING TECHNOLOGIES 2GL51-73 SWITCH, TOGGLE, DPDT, 15A, 250V

CARLING TECHNOLOGIES CA201-73 SWITCH, TOGGLE, SPST, 20A, 250V

CARLING TECHNOLOGIES CLB-153-11A3N-B-A CIRCUIT BREAKER, THERMAL, 1P, 250V, 15A

CARLING TECHNOLOGIES CLB-303-11A3N-B-A CIRCUIT BREAKER, THERMAL, 1P, 250V, 30A

CARLING TECHNOLOGIES LRGSCK611-R-S-B-0/125N SWITCH, ROCKER, DPST, 20A, 250V, RED

Carlisle - Spout Brush, 10" - 3656000Intricate twisted in wire nylon bristlesBristles are designed for fast effective cleaning of gauges, spouts, urns, percolators and a variety of quality control areas1 1/2" diameter x 10" long

Carlisle 4386631 Fruit Bowl, 4-3/4 oz., 4-1/2" dia., stain, scratch and break resistant, dishwasher- 4386631 - Carlisle Foodservice Products Carlisle 4386631 Truffle Dayton 4.75 Oz. Fruit BowlCarlisle 4386631 Fruit Bowl, 4-3/4 oz., 4-1/2" dia., stain, scratch and break resistant, dishwasher- 4386631 - Carlisle Foodservice Products4-3/4 Oz.4-1/2" Dia.StainScratch And Break ResistantDishwasher SafeBiodegradableMelamineDaytonTruffleEco MadeCapacity: 4-3/4 OzColor: TrufflePlastic: Melamine Fruit Bowls 10077838817909, 27143866LTGY, 028-4386631, CAR-4386631

Carlisle Black 20.7 Oz. Salad BowlThis Carlisle Salad Bowl comes in a black color and has a 20.7 Oz. capacity. It is constructed from break-resistant melamine, which is heat-resistant to 212?F and dishwasher safe. This bowl is BPA free and NSF Listed. Black color Melamine construction 20.7 Oz. capacity Heat-resistant to 212?F Dishwasher safe BPA free NSF Listed Height: 2.18" Base diameter: 3.13" Top diameter: 6.5" Model #: 650B-03 6010578

Carlisle Coldmaster Full-Size Lid, ClearThis full size Coldmaster clear acrylic lid protects against contaminates and helps maintain cold temperatures so your food stays fresher longer, and the molded in handle allows for easy removal.NSF Listed Dishwasher safe Height: 1/8" Width: 12-5/8" Length: 20-5/8" Material: Acrylic Color: Clear 659071

Carlisle fiberglass mop handle with plastic head. Plastic heads are ideal for use in health care facilities, food service applications. Reduces spread of bacteria, won't rust or corrode. Made in USA. Measures 1-inches diameter by 60-inches length.

Carlisle Flo-Pac fine/medium floor sweep. Will not absorb moisture; resistant to most chemicals, acids and oils. Durable synthetic sweep can be washed to extend performance life. Great for light industrial use. Hardwood block. For wet or dry sweeping of fine dust or coarse debris. 24-inches length. 3-inches bristle trim. Black color. Made in USA.

Carlisle Flo-Pac Lambs Wool Duster w/ Telescoping HandleThis lambs wool duster is perfect for dusting walls, ceilings, vents, and blinds thanks to the lambs wool construction and the telescoping handle helps you reach all of your cleaning requirements.Length: 26" Made in Indonesia Material: Lambs Wool 608407

Carlisle Flo-Pac squeegee. Use black rubber blade with metal frame for daily liquid clean up. Recommend 1-1/8-inches tapered handle. Straight blade black rubber squeegee with metal frame is ideal for daily liquid clean up.

Carlisle Foodservice stands behind the functionality and durability of each and every product. NSF Listed buffet bar has lip for easy lifting or dropping into cut-out; drain plug at end of unit. tough polyethylene construction with textured finish; thick polyurethane foam insulation holds ice for hours. BPA free. NSF Listed as N7671. Economical polyethylene will withstand temperatures from -40? to 180? F.

Carlisle high heat full size food pan. Reinforced top and bottom corners on both pan and lid help prevent chipping and cracking. Spoonable bottom makes removal of contents easier and helps prevent food waste. Molded-in capacity indicators are listed in both quarts and liters. Textured non-slip finish on corners, sides, bottom and lid reduce scratches. Smooth interior finish makes clean-up easy. High-heat pans excel in high temperature applications and are BPA free (-40 to 375 degrees F). Food pan size meets specification for use in food bars and steam tables. Pan meets EN 631-1 Euro Norm Standards for inter-stacking with existing pans. NSF listed; dishwasher safe. Made in USA. 12.7 quarts capacity. Amber color. Measures 20-3/4-inches length by 12-3/4-inches width by 4-inches height.

Carlisle manufactures food service equipment and supplies and sanitary maintenance tools and supplies for commercial, industrial, and institutional facilities. The company, founded in 1954, is headquartered in Oklahoma City, OK.

Carlisle Market Tray, Pearl White, 10-1/2" X 30" X 3/4"This 3/4" deep, pearl white market tray is designed for displaying breads, bakery items, and sliced deli meats and has a heavy duty fiberglass construction with metal reinforced rims.Air flow corners reduce drying times Dishwasher safe Reinforced edges and corners provide strength and durability Color: Pearl White Height: 3/4" Length: 30" Width: 10-1/2" Made in Mexico NSF Approved Material: Fiberglass 281137