brandMinimum: 50.00

Products with this attribute (2316 total)

10mm BAHCO? HSS Rotary Burr Cylinder Shape With Round Nose, 10mm Head Diameter, 20mm Head Length, 6mm Shank, Medium Toothing. Williams? # BAHHSGC1020M

10mm Diameter 90? Point Cobalt NC Spot Drill, Bright Finish, 25mm LOC, 89mm OAL 25mm LOC,89mm OAL,10mm Shank Series No. 1136, Order Code 10.000, Guhring Part #9011360100000

10mm Diameter Carbide End Mill - 4 Flute 38? Long Length Rougher Micro-100 Part #SHLM-160-4

10mm I.D. HSK-100A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 160mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 110.1000. Made in Germany, Guhring Part #9047361101000

10mm I.D. HSK-100A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 90mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 010.1000. Made in Germany, Guhring Part #9047360101000

10mm I.D. HSK-40A GUHRING Weldon Side Lock Holder, Coolant Through, 60mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G6.3 / 15,000 RPM | Dimensions to DIN 69882-4 | With Bore to DIN 1835-2 Form B \

10mm I.D. x 3/4\

10mm RF100A 3FL Variable Helix, Necked Weldon Flat Shank, Standard Length Bright Carbide End Mill, 22mm LOC, 30mm Reach 22MM LOC,10MM SHANK,72MM OAL RF 100 A 3-Flute, Right Hand 39?/40?/41? Variable Helix, Right Hand Cut, Weldon Flat Shank, Standard Length, Extended Neck Relief, Center Cutting Carbide End Mill, .20mm x 45? Corner Chamfer, Bright Uncoated for Roughing and Finishing Aluminum & Aluminum Alloys, Brass, Bronze, Copper, Magnesium and Plastic Series 6702 Guhring Part #9067020100000

10mm RF100U 3FL Variable Helix Firex Coated Carbide End Mill, Necked, Plain Shank, 22mm LOC, 72mm OAL, 30mm Reach 22MM LOC,10MM SHANK,72MM OAL RF 100 U 3-Flute Right Hand 41?/43?/45 Variable Helix, Right Hand Cut, Plain Cylindrical Shank, Standard Length, Extended Neck Relief, Center Cutting High Performance Carbide End Mill with .10mm x 45? Corner Chamfer, Firex Coated for Roughing, Slotting, Plunging, Ramping and Helical Interpolation in Alloyed Steels & Cast Iron up to 48 HRc. Also Suitable for Titanium / Nickel Alloys and Hardened Steels. Series 3891 Guhring Part #9038910100000

10mm RF100VA 4FL Variable Helix, Plain Shank Necked Carbide End Mill, nano-A Coated, 22mm LOC, 30mm Reach 22MM LOC,10MM SHANK,72MM OAL RF 100 VA 4-Flute Right Hand 36?/38? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, .30mm x 45? Corner Chamfer, Nano-A Coated, Extended Neck Relief, Center Cutting High Performance Standard Length Carbide End Mill For Stainless Steels, Steels, Cast Iron, Titanium / Nickel Alloys & Other Special Super Alloys Up to 54 HRc Series 3800 Guhring Part #9038000100000

10mm Rough-Tech ALU 3FL Necked Coolant Fed, Bright, Weldon Flat, Coarse Carbide Rougher, 19mm LOC, 32mm Reach 19MM LOC,10MM SHANK,72MM OAL ROUGH-TECH ALU / GS 100 A Right Hand 30? Helix, Right Hand Cut, Center Cutting High Performance Coolant-Through 3 Flute Standard Length Flutes, Extended Neck Relief Coarse Tooth Carbide Rougher, Weldon Flat Shank, .30mm x 45? Corner Chamfer, Bright Uncoated for ramping and helical interpolation roughing aluminum, aluminum alloys, brass, bronze, copper, magnesium and plastic. Series 3364 Guhring Part #9033640100000

10mm Square Shank GUHRING RH System 305 Insert Holder 90Deg Offset w/o Coolant For O.D. Machining, 125mm OAL Right Hand,Square Shank,90 Deg Offset GH305.1010.125.90.06.R, Type GH305 Offset Square Shank Guhring Grooving, Threading & Parting Off System 305 Tool Steel Holder for Triangle Inserts. Guhring Series No. 25356 Order Code 12.015 Made in Germany, Guhring Part #9253560120150

10mm Uni-Pro 2FL Ball, Necked 30? Helix Extra Long Carbide End Mill, Plain Shank, Uncoated, 40mm LOC, 60mm Reach 40MM LOC,10MM SHANK,100MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut 2 Flute Ball Nose Extra Long Length Universal General Purpose Center Cutting Carbide End Mill with 60mm Extended Neck Relief, Plain Cylindrical Shank, Bright Uncoated Series 3014 Guhring Part #9030140100000

10mm Uni-Pro 2FL Necked 30? Std Length Carbide End Mill, Plain Shank, Firex Coated, 19mm LOC, 30mm Reach, 0.5mm Radius 19MM LOC,10MM SHANK,72MM OAL UNI-PRO R Right Hand 30? Helix, Right Hand Cut, 2 Flute Standard Length Universal General Purpose Center Cutting Carbide End Mill with 0.5mm Corner Radius, 30mm Extended Neck Relief, Plain Cylindrical Shank, Firex Coated Series 3561 Guhring Part #9035610100050

10mm Uni-Pro 2FL Necked 30? Std Length Carbide End Mill, Plain Shank, Firex Coated, 19mm LOC, 72mm OAL, 32mm Reach 19MM LOC,10MM SHANK,72MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 2 Flute Standard Length Universal General Purpose Center Cutting Carbide End Mill with .10mm x 45? Corner Chamfer, 32mm Extended Neck Relief, Plain Cylindrical Shank, Firex Coated Series 3676 Guhring Part #9036760100000

10mm Uni-Pro 3FL Necked 30? Std Length Carbide End Mill, Plain Shank, Uncoated, 19mm LOC, 72mm OAL, 32mm Reach 19MM LOC,10MM SHANK,72MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 3 Flute Standard Length Universal General Purpose Center Cutting Carbide End Mill with .10mm x 45? Corner Chamfer, 32mm Extended Neck Relief, Plain Cylindrical Shank, Bright Uncoated Series 3307 Guhring Part #9033070100000

10mm Uni-Pro 4FL Necked 30? Std Length Carbide End Mill, Plain Shank, Firex Coated, 22mm LOC, 30mm Reach, 0.8mm Radius 22MM LOC,10MM SHANK,72MM OAL UNI-PRO R Right Hand 30? Helix, Right Hand Cut, 4 Flute Standard Length Universal General Purpose Center Cutting Carbide End Mill with 0.80mm Corner Radius, 30mm Extended Neck Relief, Plain Cylindrical Shank, Firex Coated Series 3562 Guhring Part #9035620100080

10x1/2x1 1/2 HSS Sm, 38 Str ,TiALN Coated KEO Part #84882

10x1/4x1 1/2 HSS Slitting Saw, 56stg,TiCN Coated KEO Part #80720

10x9/16x1 1/2 HSS Sm, 32 Stg KEO Part #3260

11.0mm Diameter Jobber Length Carbide Twist Drill, 118? Split Point, AlTiN Coated, 73mm Flute, 114mm OAL 73mm Flute Length,11.0mm Shank,114mm OAL GWS/Monster jobber length twist drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. 25? helix angle quickly evacuates chips and allows for increased feed rates. 118? split point for quick penetration without walking. The most versatile overall length lends this geometry to a multitude of uses. Optional AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #450-404331B

11.15mm Diameter HSS General Purpose 118? Point Jobber Length Drill, Steam Oxide Finish, 94mm LOC, 142mm OAL 94mm LOC,142mm OAL,11.15mm Shank Series No. 205, Order Code 11.150, Guhring Part #9002050111500

11.25mm Diameter HSS 118? Point General Purpose Stub Length Drill, Steam Oxide Finish, 47mm LOC, 95mm OAL 47mm LOC,95mm OAL,11.25mm Shank Series No. 223, Order Code 11.250, Guhring Part #9002230112500

11.2mm Carbide 140? Point RT100U 3xD TiN Coated Drill, Reinforced Whistle-Notch Flat Shank, 55mm LOC 55mm LOC,102mm OAL,12mm Shank Series No. 1184, Order Code 11.200, Guhring Part #9011840112000

11.2mm Carbide 140? Point RT100U 7xD nano-Firex? Coolant Fed Drill, Reinforced Whistle-Notch Shank, 114mm LOC 114mm LOC,163mm OAL,12mm Shank Series No. 5612, Order Code 11.200, Guhring Part #9056120112000

11.5mm HSS GT100 Parabolic Flute Bushing Length Drill, Morse Taper #1 Shank, 130? Point, Nitrided Lands, 125mm LOC 125mm LOC,206mm OAL,MT1 Shank Series No. 551, Order Code 11.500, Guhring Part #9005510115000

11.75mm Cobalt General Purpose Morse Taper Shank #1, 118? Point Jobber Length Drill, Steam Oxide Finish, 94mm LOC 94mm LOC,175mm OAL,MT1 Shank Series No. 345, Order Code 11.750, Guhring Part #9003450117500

11.9mm HSS General Purpose Morse Taper Shank #1, 118? Point Jobber Length Drill, Steam Oxide Finish, 101mm LOC 101mm LOC,182mm OAL,MT1 Shank Series No. 245, Order Code 11.900, Guhring Part #9002450119000

11/64\

11mm 4 Flute Square End Single End Carbide End Mill, Bright Finish, Extra Long Length, 76mm Flute Length, 152mm OAL 76MM LOC,12MM SHANK,152MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #218-074331

11mm Diameter HSS Left Hand Cut 118? Point Stub Length Drill, Steam Oxide Finish, 47mm LOC, 95mm OAL 47mm LOC,95mm OAL,11mm Shank Series No. 226, Order Code 11.000, Guhring Part #9002260110000

11mm I.D. x 20mm O.D. GUHRING GuhrOJet Peripheral Coolant Fed Hydraulic Chuck Reduction Sleeve For clamping smaller shank diameter in hydraulic chucks | for tool shank tolerance h6 | concentricity deviation ? 2 um | with adjustable limit stop | with coolant slots for peripheral cooling, improving machining process and extending cutting tool life | the application of reduction sleeves permits transferable torque increase of approximately 25% in comparison to direct clamping. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different outside diameters; 1/2\

12.75mm HSS General Purpose Morse Taper Shank #1, 118? Point Jobber Length Drill, TiN Coated, 101mm LOC 101mm LOC,182mm OAL,MT1 Shank Series No. 654, Order Code 12.750, Guhring Part #9006540127500

12.8mm HSS GT100 Parabolic Flute Bushing Length Drill, Morse Taper #1 Shank, 130? Point, Nitrided Lands, 134mm LOC 134mm LOC,215mm OAL,MT1 Shank Series No. 551, Order Code 12.800, Guhring Part #9005510128000

12.8mm HT800WP 140? Point Angle nano-A Coated Carbide Replaceable Tip Drill Insert For Stainless Steel Series No. 4115, Order Code 12.800, Guhring Part #9041150128000

12mm ER25 GUHRING Collet Sealing Washer For Coolant Pressure Up To 150 Bar, 12.0mm - 11.5mm Sealing Range Collet Sealing Washers Are For Use With Coolant-Through Cutting Tools And Standard ER Collets in Conjunction With Sealed Collet Chucks Which Use IC/ER Collet Nuts Specifically Designed For Use With Collet Sealing Washers. The Washer is First Installed Into a Special Recess Inside The IC/ER Collet Nut, Then The Collet is Installed Into The IC/ER Collet Nut as Usual. ER Collet Sealing Washers Are to be Applied For Tool Shanks Matching The Sealing Washer Nominal Size And 0.5mm Smaller, Down to the Next Size Sealing Washer in the Series. - For Example: to Seal a 3.17mm (1/8\

12mm I.D. MAS/BT-40 AD/B GUHRING Hydraulic Chuck w/Coolant & Increased Clamping Force, 90mm Gage Length MAS/BT taper to DIN ISO 7388-2 coolant form AD/B | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | axial length adjustment | for tool shank tolerance h6 | includes adjustment screw, Series no. 4900 | includes hexagon chuck key, Series no. 4912. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

12mm I.D. x 25mm Shank GUHRING Shrink Fit Extension, 4? Nose Angle, 20mm Nose Diameter, 200mm Overall Length 46mm Socket Depth For use in hydraulic chucks or shrink fit chucks | for carbide shanks to h6 diameter tolerance (from I.D. 14mm HSS also possible) | includes length setting screw | suitable for internal cooling. Series No. 4719, Order Code 012.2250. Made in Germany, Guhring Part #9047190122250

12mm O.D. GuhrOSync Clamping Sleeve for DIN/JIS Standard Taps: M7, M9, M10, GuhrOJet Peripheral Cooling 07.0mm Shank,05.5mm Square,DIN/JIS Standard For Use With Guhring's GuhrOSync Hydraulic Synchro Tapping Chucks Series No. 4606, Order Code 007.0120. Made in Germany, Guhring Part #9046060070120

12mm O.D. GuhrOSync Sealed Clamping Sleeve for DIN Standard: M3, M4.5, M5 Coolant-Thru Taps 03.5mm Shank,02.7mm Square,DIN Standard For Use With Guhring's GuhrOSync Hydraulic Synchro Tapping Chucks Series No. 4605, Order Code 003.5120. Made in Germany, Guhring Part #9046050035120

12mm O.D. GuhrOSync Sealed Clamping Sleeve for JIS Standard: M5 Coolant-Thru Taps 05.5mm Shank,04.5mm Square,JIS Standard For Use With Guhring's GuhrOSync Hydraulic Synchro Tapping Chucks Series No. 4605, Order Code 005.5120. Made in Germany, Guhring Part #9046050055120

12mm RF100U 4FL Variable Helix Firex Stub Length Carbide End Mill, Necked, Plain Shank, 16mm LOC, 73mm OAL, 26mm Reach 16MM LOC,12MM SHANK,73MM OAL RF 100 U 4-Flute Right Hand 35?/38? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, .20mm x 45? Corner Chamfer, Firex Coated, Extended Neck Relief, Center Cutting High Performance Stub Length Carbide End Mill For Roughing and Finishing Alloyed Steels, Cast Iron, Free Cutting Steels, Tool Steels, Hardened Steels, Titanium and Titanium Alloys & Other Special Alloys Up to 54 HRc Series 6706 Guhring Part #9067060120000

12mm RF100U 4FL Variable Helix Firex X-Long (4XD) Carbide End Mill, Necked, Plain Shank, 45mm LOC, 150mm OAL, 48mm Reach 45MM LOC,12MM SHANK,150MM OAL RF 100 U 4-Flute Right Hand 35?/38? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, .20mm x 45? Corner Chamfer, Firex Coated, Extended Neck Relief, Center Cutting High Performance Extra Long (4XD) Length Carbide End Mill For Roughing and Finishing Alloyed Steels, Cast Iron, Free Cutting Steels, Tool Steels, Hardened Steels, Titanium and Titanium Alloys & Other Special Alloys Up to 54 HRc Series 3627 Guhring Part #9036270120000

12mm X 170mm X120? Keo NC Spot Drill HSS-E KEO Part #35656

13.5mm Diameter Cobalt 118? 4-Facet Point General Purpose Taper Length Drill, Bright Finish, 140mm LOC, 214mm OAL 140mm LOC,214mm OAL,13.5mm Shank Series No. 5536, Order Code 13.500, Guhring Part #9055360135000

13.8mm Cobalt General Purpose Morse Taper Shank #1, 118? Point Jobber Length Drill, Steam Oxide Finish, 108mm LOC 108mm LOC,189mm OAL,MT1 Shank Series No. 345, Order Code 13.800, Guhring Part #9003450138000

13/32\

13/64\

13110-006

13mm Diameter HSS General Purpose 118? Point Angle Jobber Length Drill, TiN Coated, 101mm LOC 101mm LOC,151mm OAL,13mm Shank Series No. 651, Order Code 13.000, Guhring Part #9006510130000

13mm ER32 GUHRING Collet Sealing Washer For Coolant Pressure Up To 150 Bar, 13.0mm - 12.5mm Sealing Range Collet Sealing Washers Are For Use With Coolant-Through Cutting Tools And Standard ER Collets in Conjunction With Sealed Collet Chucks Which Use IC/ER Collet Nuts Specifically Designed For Use With Collet Sealing Washers. The Washer is First Installed Into a Special Recess Inside The IC/ER Collet Nut, Then The Collet is Installed Into The IC/ER Collet Nut as Usual. ER Collet Sealing Washers Are to be Applied For Tool Shanks Matching The Sealing Washer Nominal Size And 0.5mm Smaller, Down to the Next Size Sealing Washer in the Series. - For Example: to Seal a 3.17mm (1/8\

13pc BAHCO? Basic Maintenance Tool Kit In Universal Tool Pouch w/Carrying Handle - 3 Pliers, 5 Screwdrivers, 3 Combination Wrenches & 1 Adjustable Wrench. Fits Any Tool Belt. Williams? # 4750-UP-1TS5

14 NPT TPI For Minimum Hole 1/2\

14.0mm HT800WP 140? Point Angle nano-Si Coated Carbide Replaceable Tip Drill Insert For Cast Iron Series No. 4113, Order Code 14.000, Guhring Part #9041130140000

14.50mm - 14.99mm Insert Range, 16mm Shank, HT800WP 10XD Indexable Drill Body, Coolant Fed, Nickel Coated 152.8mm LOC,225mm OAL,16mm Shank Spiral Flute Tool Steel Drill Body with Reinforced Straight Shank and Whistle-Notch Flat per DIN 6535-HE Series No. 4110, Order Code 14.500, Guhring Part #9041100145000

14.8mm Diameter HSS 118? Point General Purpose Stub Length Drill, TiN Coated, 56mm LOC, 111mm OAL 56mm LOC,111mm OAL,14.8mm Shank Series No. 653, Order Code 14.800, Guhring Part #9006530148000

14.8mm HSS General Purpose Morse Taper Shank #2, 118? Point Jobber Length Drill, Steam Oxide Finish, 114mm LOC 114mm LOC,212mm OAL,MT2 Shank Series No. 245, Order Code 14.800, Guhring Part #9002450148000

14mm Carbide Radius Point RT100R 5xD Firex? Coated Coolant Fed Drill, Reinforced Straight Shank, 77mm LOC 77mm LOC,124mm OAL,14mm Shank Series No. 6501, Order Code 14.000, Guhring Part #9065010140000

14mm CAT-50 GUHRING Shrink Fit Holder With Conventional Coolant Through, 80mm Gage Length CAT Taper to ANSI / ASME B 5.50 | Coolant Form AD/B | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | Includes Setting Screw, Series No. 4977 With Axial Force Dampening For Perfect Runout Accuracy | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4764, Order Code 014.0500. Made in Germany, Guhring Part #9047640140500

14mm I.D. HSK-63A GuhrOJet Peripheral Coolant-Fed Shrink Fit Holder, 120mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes 4 or 6 M6 Balancing Screws | Optimized For Cutting Tools Without Internal Coolant Ducts | With Coolant Ducts in the Bore For Directing Peripheral Coolant Directly to the Cutting Tool, Improving The Machining Process And Extending Tool Life | Includes Setting Screw, Series No. 4977 With Axial Force Dampening For Perfect Runout Accuracy. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4755, Order Code 214.0630. Made in Germany, Guhring Part #9047552140630

14mm I.D. MAS/BT-40 GUHRING Whistle Notch Side Lock Holder, Coolant Through, 63mm Gage Length MAS/BT to DIN ISO 7388-2 Form AD/B | With Bore to DIN 1835-2 Form E ?Whistle Notch\

14mm I.D. x 1-1/4\

14mm Uni-Pro 2FL Ball, Necked 30? Helix Std Length Carbide End Mill, Plain Shank, Uncoated, 22mm LOC, 38mm Reach 22MM LOC,14MM SHANK,83MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 2 Flute Ball Nose Standard Length Universal General Purpose Center Cutting Carbide End Mill with 38.00mm Extended Neck Relief, Plain Cylindrical Shank, Bright Uncoated Series 3308 Guhring Part #9033080140000

14mm Uni-Pro 4FL Necked 30? Helix X-Long Carbide End Mill, Plain Shank, Uncoated, 45mm LOC, 150mm OAL, 105mm Reach 45MM LOC,14MM SHANK,150MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 4 Flute Extra Long Length Universal General Purpose Center Cutting Carbide End Mill with .15mm x 45? Corner Chamfer, 105mm Extended Neck Relief, Plain Cylindrical Shank, Bright Uncoated Series 3012 Guhring Part #9030120140000

15.2mm Carbide 140? Point RT100U 3xD TiN Coated Drill, Reinforced Whistle-Notch Flat Shank, 65mm LOC 65mm LOC,115mm OAL,16mm Shank Series No. 1184, Order Code 15.200, Guhring Part #9011840152000

15.3mm Carbide 140? Point RT100HF 3xD nano-Si? Coated Coolant Fed Drill, Reinforced Straight Shank, 65mm LOC 65mm LOC,115mm OAL,16mm Shank Series No. 8520, Order Code 15.300, Guhring Part #9085200153000

15.50mm Hp Patriot Carbide Drill 8xd Cnt

15.7mm HSS General Purpose Morse Taper Shank #2, 118? Point Jobber Length Drill, Steam Oxide Finish, 120mm LOC 120mm LOC,218mm OAL,MT2 Shank Series No. 245, Order Code 15.700, Guhring Part #9002450157000

15.8mm HT800WP 145? Point Angle nano-A Coated Carbide Replaceable Tip Drill Insert For Pilot Drilling Series No. 4111, Order Code 15.800, Guhring Part #9041110158000

15mm Diameter HSS Low Helix 118? Point Angle Jobber Length Drill, Bright Finish, 114mm LOC 114mm LOC,169mm OAL,15mm Shank Series No. 206, Order Code 15.000, Guhring Part #9002060150000

15mm HSS GT100 Parabolic Flute Bushing Length Drill, Morse Taper #2 Shank, 130? Point, Nitrided Lands, 147mm LOC 147mm LOC,245mm OAL,MT2 Shank Series No. 551, Order Code 15.000, Guhring Part #9005510150000

16.0mm HT800WP 140? Point Angle Bright Uncoated Carbide Replaceable Tip Drill Insert For Aluminum & Non-Ferrous Metals Series No. 4114, Order Code 16.000, Guhring Part #9041140160000

16.0mm RT800WP 140? Point Angle TiN Coated Carbide Replaceable Tip Drill Insert For General Purpose Use Series No. 1047, Order Code 16.000, Guhring Part #9010470160000

16.3mm Carbide 140? Point RT100U 3xD TiN Coated Drill, Reinforced Whistle-Notch Flat Shank, 73mm LOC 73mm LOC,123mm OAL,18mm Shank Series No. 1184, Order Code 16.300, Guhring Part #9011840163000

16.50mm Hp Patriot Carbide Drill 8xd Cnt

16.5mm Carbide Radius Point RT100R 7xD Firex? Coated Coolant Fed Drill, Reinforced Straight Shank, 171mm LOC 171mm LOC,223mm OAL,18mm Shank Series No. 6502, Order Code 16.500, Guhring Part #9065020165000

16.9mm HSS General Purpose Morse Taper Shank #2, 118? Point Jobber Length Drill, Steam Oxide Finish, 125mm LOC 125mm LOC,223mm OAL,MT2 Shank Series No. 245, Order Code 16.900, Guhring Part #9002450169000

16mm 120? Spyrotec