AttributeKey01: Milling Diameter

Products with this attribute (65 total)

18.000 mm Cutter DIA x 45.00 mm Length of Cut Carbide Square End Mill for Aluminum Alloys, 3 Flutes, ZrN Coated

Ball End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/32 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, 4.00mm Dia, Carbide

Ball End Mill, Carbide, 0.0312"Milling dia

Carbide End Mill, 3-1/2 in,CEM3364B4TICN

Carbide End Mill,11/64In,4FL,Double

Carbide End Mill,2in,CEM316F4TICN

Carbide End Mill,7/32In,2FL,Single,2In

Carbide End Mill,7/64In,2FL,Single,1-1/2

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.40 mm, 16.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 9/16 in, 6 in

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1200 in, 25/32 in, 140.00mm

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.05 in, 3/4 in, 6 in

Corner Radius End Mill, 5.75mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00mm, 54.00mm

Corner Radius End Mill, 9.53mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 7/8 in, 3 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 1.500" L

End Mill,0.3125 in. Milling Dia.,5V0S

End Mill,0.3750 in. Milling Dia.,I2S

End Mill,15/64 in.4 Flutes,TiCN

End Mill,3/8 in.2 Flutes,TiN

End Mill,5/8 in.4 Flutes,TiN

End Mill,5/8 in.4 Flutes,TiN

End Mill,9/32 in.3 Flutes,TiN

End Mill,TiAlN,0.1880 in. Milling Dia.

End Mill,TiAlN,0.5000 in. Milling Dia.

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1/4 in, Overall Length 3 in, Shank Dia. 1/8 in

Square End Mill, 12.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 22.00 mm, Overall Length 130.00 mm, Shank Dia. 12.00 mm, Neck Dia. 11.500 mm

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, K30F-TICN Grade, Carbide

Square End Mill,5/8" Cut Length,nACRo

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,WS15PE Grade,Carbide

Walter Prototyp