Corbin Russwin Corbin Russwin ED5200A-630-M94 Electric Latch Pullback 3-Hour Fire-Listed Rim Exit Device - KAL DOOR HARDWARE

Standard device is non-handed. Bar Length Easily field cut to size. Standard: 36 (914mm) bar fits 30- 36 (762mm-914mm) door. Door Thickness 1-3/4 (44mm) standard. Minimum width 4-1/2 (114mm). Latchbolt 3/4 (19mm) throw, stainless steel pullmantype with stainless steel deadlocking latch. Heavy-duty cold-forged steel chassis; heavy-gauge steel mechanisms, electroplated for corrosion resistance; finished parts are brass, bronze or stainless steel; stainless steel springs; nylon bearings. Projection 3-1/4 (83mm) active, 2-3/4 (70mm) dogged. Fasteners standard on panic devices: machine screws and wood door fasteners. Standard on fire-rated devices: sex nuts and bolts. Strike Surface-mounted 3/8 (10mm) diameter roller strike, complete with positive locking plate and shims, assuring low friction relocking for a long, trouble-free life. NFPA All exit devices comply with NFPA 101 Life Safety Code. All fire-rated devices comply with NFPA 80 Fire Doors and Windows Electric Latch Pullback - M94 Continuous-duty solenoid retracts the latch bolt(s) for momentary or maintained periods of time. Latch Pullback provides a remote means of unlocking exit devices Satin Stainless Steel 630 Finish Electrical Specifications Requires 781N Controller (120VAC input, output sequencer for one or two devices). No substitutes; using other power sources voids warranty. Requires a 4-wire electrical transfer pivot or hinge. A dual retraction/holder-type solenoid. 6-9 Amp in rush @ 24VDC to 28VDC (.172 Amp holding-continuous duty.) Device bolts remain retracted for as long as the device is energized. Removal of power returns the device to the life safety, self-latching mechanical mode. Interface with central or local fire alarm system, automatic door operators, access control systems, security alarm systems, and blow open door systems.