- mpnP15SS2P050
- brandname: Plastec
- manufacturername: Plastec
Attributes
| Key | Value |
|---|
| Agency Compliance | AMCA and CSA certified,. |
| Airflow @ 0.125 in SP | 350 cfm |
| Airflow @ 0.250 in SP | 450 cfm |
| Airflow @ 0.500 in SP | 500 cfm |
| Airflow @ 0.500 in SP R. | 0 to 999 cfm |
| Airflow @ 1.000 in SP | 500 cfm |
| Airflow @ 1.250 in SP | 500 cfm |
| Airflow @ 1.500 in SP | 425 cfm |
| Airflow @ 1.500 in SP R. | 0 to 999 cfm |
| Airflow @ 2.000 in SP | 400 cfm |
| Airflow @ 2.500 in SP | 100 cfm |
| Airflow @ 2.500 in SP R. | 0 to 999 cfm |
| Airflow @ Static Pressu. | 350 cfm @ 0.125 in SP /. |
| Assembly | Fully Assembled |
| Bearing Type | Ball, Ball Bearing, Sea. |
| Blower RPM | 3,450 RPM |
| CFM @ 0.125-In. SP | 350 |
| CFM @ 0.200-In. SP | 375 |
| CFM @ 0.250-In. SP | 450 |
| CFM @ 0.500-In. SP | 500 |
| CFM @ 0.750-In. SP | 500 |
| CFM @ 1.000-In. SP | 500 |
| CFM @ 1.250-In. SP | 500 |
| CFM @ 1.500-In. SP | 425 |
| CFM @ 2.000-In. SP | 400 |
| CFM @ 2.500-In. SP | 100 |
| Corrosion Resistant | Yes |
| Current | 4.9/2.45 A |
| dBA @ 5 Feet | 72 dBA |
| Depth (In.) | 17.04 in |
| Discharge Position | Bottom Horizontal, Down. |
| Drive Type | Direct Drive |
| Flange Size | Not Applicable |
| Flange Type | Non-Flanged |
| For Air Type | Contaminated, Damp, Dir. |
| For Fan Speed (Dependen. | 3,450 RPM to 3,450 RPM |
| Frequency | 60 Hz |
| Full Load Amps | 4.9/2.45 |
| Height (In.) | 21.93 in |
| Housing Finish | Polypropylene |
| Housing Height | 21 7/8 in |
| Housing Material | Polypropylene |
| Housing Width | 13 7/8 in |
| Hz | 60 Hz |
| Includes | Motor Mounting Base |
| Includes Drive Package | Yes |
| Includes Motor | Yes |
| Includes Mounting Hardw. | Yes |
| Inlet Dia. (In.) | 4.92 in |
| Inlet Diameter | 4 7/8 in |
| Inlet Type | Single-Inlet |
| Item | Plastec Blower |
| Material | Plastic Wheel & Plastic. |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Max. Inlet Temp. (Deg. . | 140 Degrees F |
| Maximum Fan Speed | 3,450 RPM |
| Maximum Inlet Air Tempe. | 140 Degrees F |
| Maximum Static Pressure | 2 1/2 in wc |
| Minimum Ambient Tempera. | -40 Degrees C |
| Minimum Fan Speed | 3,450 RPM |
| Motor Enclosure | Totally Enclosed Fan Co. |
| Motor Enclosure Design | Totally Enclosed Fan-Co. |
| Motor Frame | 71 |
| Motor Frame Designation | 71 |
| Motor Horsepower | 1/2 hp |
| Motor HP | 1/2 hp |
| Motor RPM | 3,450 RPM |
| Motor Type | General Duty, Single Ph. |
| Mount Type | Motor Mount |
| Mounting Orientation | Multiposition |
| Nominal Voltage | 115/230V AC |
| Number of Discharge Pos. | 2 |
| Outlet Dia. (In.) | 4.47 in |
| Outlet Diameter | 4 3/8 in |
| Outlet Height | Not Applicable |
| Outlet Shape | Round |
| Outlet Shape_broad | Round |
| Outlet Size | 4 3/8 in diameter |
| Outlet Width | Not Applicable |
| Overall Depth | 17 in |
| Overall Height | 21 7/8 in |
| Phase | 1 |
| Product Type | Plastec Blower |
| Rotation | CCW |
| Shaft Dia. (In.) | 14 mm |
| Shaft Diameter | 14 mm |
| Sound Level | 72 dBA @ 5 ft |
| Standards | AMCA Certified, CSA Cer. |
| Thermal Overload Protec. | Yes |
| Type | Direct Drive Forward Cu. |
| Voltage | 115/230 |
| Wheel Dia. (In.) | 6 in |
| Wheel Diameter | 6 in |
| Wheel Dimensions | 6 in Dia. x 3 3/8 in W |
| Wheel Material | Polypropylene |
| Wheel Type | Forward Curve |
| Wheel Width | 3 3/8 in |
| Wheel Width (In.) | 3.38 in |
| Width (In.) | 13.88 in |